Can I breasts to support child-rearing mammals bottles
From 3 months (comes with silicone rubber nipple).
"Pigeon breast feeling baby bottles (plastic) Mickey pattern 240 ml", MOM and I breasts from drinking and drinking in the same mouth movements or prior to installation. breasts with is easier to use, to assist a smooth breastfeeding bottle.
Disney (Disney patterns) Mickey & Minnie mouse design!
To support the breastfeeding baby bottles.
Breastfeeding experience studying the movement of your mouth is baby drinking breast milk, made with nipples.
-Hand easier to support, not rolling a bottle a gentle rounded.
-Opening type, easy to wash and milk preparation
-Lightweight, durable plastic (PPSU)
• Fit the baby baby 2 size (160 ml-240 ml).
• Heat-resistant glass, and there are no bottles.
Nipples is a 3 steps needed to better feeding movement can make.
(Silicone nipples M size nipple)
♦ step 1: chew on wax
A wider diameter nipples lips PITA! and can adhere.
♦ step 2: bring the milk in the movement of the tongue
Soft resilient are the nipples, so natural, smooth tongue movement.
♦ step three: swallow
You can gently drinking hole sizes according to the baby's growth.
[How to use]
-Cleaning: always try, to clean and hygienic.
And wash it before using it for the first time, your disinfection.
And pigeon feeding bottle vegetable washing, wash on lukewarm water immediately after every use.
-Use the sponge brush to wash plastic bottle.
And vent valves and vent holes, sucking hole with both hands gently scrubbed please. Strongly wash and pull to avoid valve, causing the leak.
-To protect vent valve safe white powdered food additives apply there. Please use it after first wash.
-Nipple tip is very delicate. While holding the tip of the nipples with fingers developemental stages wash when washing and cleaning brush.
* Note: baby things that cause scratches when cleaning Abrasives containing wool, metal scouring pads or cleansers, such as when to wash the bottles do not use. Cracking may result.
● disinfect: use must be disinfected.
-Put the nipples big pan into plenty of water, washed well, bottles, caps, hoods, fire raises the boiling point. Sterilization time is 3 to 5 minutes after boiling.
And may be transformed and put lots of hot water, not boiling on the edge of the pan.
-Excessive boiling the product quickly Saute.
-Baby "pigeon milk PON", such as the disinfection using disinfectant of bottles, nipples. For more information, follow the instructions of the disinfectant.
• Disinfection, thinning color print on the bottle.
See microwave sterilization.
And must be specially designed for use. Mammals cannot sterilize bottles and parts intact into the microwave oven.
-Follow disinfection method for handling equipment.
-Please use according to the instruction manual for your microwave.
* If you use in the hospitals, kinds of microorganisms, and unspecified number of baby environments, such as adequate, should determine the time.
-How to assemble
* Make sure before assembling the vent valve is open.
1. milk and crush the head boards, has.
2. from the top of the CAP plug long nipples seat on one side.
3. with your thumbs into inside the CAP across the seat.
4. This is completed.
* Make sure seat is not distorted or, upside down.
5. pivot in the bottle nipple and Cap.
* Outing if you set the hood sometimes and do not use dust, it is hygienic.
-Milk preparation: powdered milk show see more harmonic method.
1. use hot water milk preparation, make sure boiling point once, more than 70 ° C cool.
* Do not use never became less than 70 ° C, and left 30 minutes over boiling water.
* During winter, baby hot water temperature drops below it if you put the milk water of about 70 degrees because we are cold bottles. Baby bottles in warm water once mammals we recommend to cycle the milk water above 70 ° C, discard the hot water warming up the bottle from.
2. milk to follow breast to name baby formula manufacturers.
3. set the bottle caps attached to the nipples and tighten lightly.
Without a set of food burned, such as no clean towels and pot baby hook with baby bottles have the content mix perfectly bottle slowly rotates in the horizontal direction. Milk powder has melted completely, pour remaining water until the single amount.
* Erupted inside this assent and the risk of Burns is dangerous.
Set food and shake the baby due to high-temperature hot water bottle pressure or increasing leakage to gush of fear is dangerous.
4. install the hood style milk after the baby cooled the temperature bias to lean against vessels such as the cooking Bowl is for water, or having a bottle in place, tap water, suitable for feeding.
* Baby nipples / caps without water at this time, as the focus on the water below the cap of the bottle.
* Baby may get out food only to grab the hood attached to the CAP and with the sure support near the top of the bottle.
5. check temperature suitable for feeding, hanging a small amount of milk on the inside of the arm.
It is okay to feel warm, not hot. If you feel hot, let it cool before feeding little.
-Keep feeding from cool to body temperature.
And, feeding baby sure Dacko. In addition, breastfeeding are parents.
And may too tighten the CAP and squashed nipples during breastfeeding.
-Please give a as soon as possible after applying milk. Discard milk did not use within 2 hours.
And also changed to the new nipple baby adapt to one nipple and I hate lead can be. When long nipples 2 or more alternating for about two months in torn or not be change as soon as possible.
-Please note there baby teeth in biting nipples, pulling and tearing.
□ product name: baby equipment (plastic)
□ product code: 00348
□ material: polypropylene hoods, Cap, bottle nipples and synthetic rubber (silicone rubber) and polyphenylsulfone (PPSU)
□ disinfection method: boiling ○ the range Yes, chemical ○
□ shaped hole sucking nipples: nipple (M size)
□ bottle capacity: 240 ml (maximum scale capacity)
□ use category: for hot water
□ heat resistance temperature: 120 ° C
□ sales source: pigeon Corporation
[Customer service] 03-5645-1188
□ Category: nipples made in China made in Thailand and feeding bottles, feeding machine, feeding supplies, baby
-Do after you wash after each use, use nipple or bottle-brush, such as sterilization.
● do not place near fire. Can be transformed.
-Please use a sponge brush to clean. Wash with a stiffer brush can scratch.
-Toning milk when baby bottles will be hot. Please note that to Burns.
-Stop is milk preparation by the children. You may be burned.
-Keep feeding to make sure the temperature of the milk and drink from. You may be burned.
-Disinfection after boiling and microwave disinfection after a baby bottle gets warm. Please note that to Burns.
-Baby style milk at the spout inside and shake the bottle vertically, fear of Burns is dangerous. Also, set food and shake the baby due to high-temperature hot water bottle pressure is dangerous may increase leaks and injection. Also set the food and shake the baby due to high-temperature hot water bottle pressure increasing leakage or gush of fear is dangerous.
-Baby bottle is for giving baby feeding and other beverages. Do not use it for other purposes.
-Baby bottle scale dimmer for breasts. If you need more accurate use measuring cups and measuring spoons.
-Bottle body light brown color is the color of the material body. (Colorant free)
Package design and subject to change without notice.