Thanks ZO-40 W (white) was sold out.
In the future production of ZO-40B (black) only.
|Ultrasonic cutter ZO-40B
|Comments from the Manager|
| Rule who did not actively selling in early models for hobby ultrasonic cutter USW-333, store and Tokyu hands like in sells variety you have your distribution model sells in order to now, there is a border.
This time, melt or because it somehow? The melted plastic users released a reduced model ZO-40.
* 2014 / 8 / 6
That you want to disconnect the thin film ZO-41 + blade and ZO-40 + blade demo rating was ZO-41 variation in the load power fluctuates, so ZO-40 is easier to cut that out.
I think zo-40 is a type of blade that best can take advantage. To get to that realizationFor a limited time in the blade set ZH14S (3300 Yen tax) would want to try + maintenance set SB01 (tax ¥ 1200)。
Further, giving one thin length of prototype blade prototype blade has tipped production dropped the tip angle, but (not for sale). (If there are 50 or so there, no exit)
Our own special set.
* Please note handling, cut very thin blade blade the cutting speed will go up, but for the absence of Ultrasound also.
|♦ Ultrasonic cutter release flow|
|2001 model USW-333 (discontinued: repairs until 4/2017)
2006 model USW-334.
2012 model ZO-40
2014 model ZO-41 (top-ZO-40)
♦ characteristics of ultrasonic cutter ZO-40
Or others over a power cut and ultrasonic cutters, the bells and whistles at friction heat and mechanical failure caused the injury factors.
Therefore, ZO-40 is excessive force to stop ultrasonic oscillator circuit is adopted.
If he press the hand piece switch again ultrasonic wave oscillates.
Car cord also from some users, tension is it difficult to do take, this time adopted the straight-through cable. For users who also want to place the body 机下 in long cables.
* 5/15/2014 as a high-end, ultrasonic cutters ZO-41 on sale now.
|□ to write a review and get a bonus!|
|1. Please check whether or not write a review before you turn on the shopping cart.
2. Bonus included in review where you choose will change.
Nice review comes only standard accessories.
3. We will get found or tried to review, comment and if possible what worked, and product design for future reference.
|Ultrasonic cutter ZO-40 main specifications|
-Cannot use exceeds resins exceeds a thickness of 3 mm or 2 mm thick cardboard.
And there is a load of thick, plastic, hard to cut materials.
And as a model for developing this product. You cannot use applications disconnect when large forces are applied.
-Ultrasonic cutter has raised cutting effect in a vibrating blade. Can't cut with a cutter usually will not.
|To corporate customers|
|And who need to invoice, the invoice please type required and shipping inquiries email after confirmation of payment at delivery.
At the time of product delivery is OK, please in the comments box when you order.
And is seeking to buy. For more information, please contact us by email.
* Regarding the model company, trading with several model wholesale. Please contact us to be removed wholesale.
Ultrasonic cutter problems arose when
1 Please contact Ecotech.
Circle is fine, so let things below.
Your contact information (email address, phone number, etc.)
• Purchase date (see range is fine. ）
-Ultrasonic cutter body model
• Serial number (has a label in the cutter body. ）
-Symptoms of the problem
[Contact information] Ecotech (us-dolphin fish Finder with ultrasound)
2 from the ECOTEC book manufacturer contact Honda electronics.
(Retail shops, so you can respond quickly. ）
3 in your future will contact.
If you send us a body
[Destination], 441-3131, Aichi, Toyohashi City, Oyama mounds 20
ECOTEC co., Ltd.
|JP Post EMS||Your order will be shipped to you via Japan Post EMS. Japan Post is a speedy delivery service that delivers to more than 120 countries. With an effective tracking system and insurance program, EMS is able to offer a secure delivery worldwide. You can track your package with the tracking code provided and it will be delivered within a week. See estimated shipping fee|
|Credit Card||We accept credit and debit cards.
The following credit and debit cards can be used:
|PayPal||We accept PayPal. After receiving the order confirmation e-mail, please proceed with the PayPal payment.
*Please note that if payment through PayPal is not confirmed by the date indicated in the e-mail, your order will be automatically cancelled.
Start Date:03/07/2017 00:00 JST
End Date:30/09/2017 23:59 JST
This product cannot be shipped to United States from the store.
Please contact the store for further information.