5% Bonus Points Back!

Shop Japan. We ship worldwide, bringing Japan directly to you.

 ATAGO ATAGO 

Refractometer ATAGO ATAGO process (inline) Rx PRM-100-

$19,902.09 (¥ 2,138,400)*
Please select options before adding to cart.
2X POINTS! Buy it and earn 42768 points!
About Points
*Actual price may vary according to exchange rates.
Payment will be charged in yen

Product Information

Power supply AC100V, 50 / 60 Hz Waterproof protection grade JIS-C0920 7 splash proof-IEC standard 529 IP67 Accessories Detector - operation display connection cable (15 m standard) Recorder for output (4-20 mA) (normal 10) Clamp (for sample introduction, installation) O-rings (for sample introduction, installation) Dimensions & weight Detection of:10.8(W) x 26.6 (L) x 10.8 cm 3.3 Kg (D) Operation display section:19.2(W) x 10.0 (D) x 24.0 cm 3.3 Kg (H) Power consumption 30 VA Preferences 5 to 40 ° C, 30 to 90% RH or less Withstand voltage 0.98 MPa (10Kgf/cm2)


ATAGO ATAGO ATAGO ATAGO ATAGO measurement, [Tag] ATAGO.

160316-30 0189
| 送料_______________
Shipping size (3)

* Part of Hokkaido, Okinawa and remote islands is estimated separately





| What can be used against you _ _ _ _ _ _ _ _ _
On the measurement of the refractive index of the solution flow in a pipe factory and Brix (%).




| Product features _ _ _ _ _ _ _ _ _ _ _ _ _
Block the levels of non-compliance in each process

Process Refractometer RX PRM-100-detector and the display part two is the configuration. Small Prism plane exposed part of the detector and the interface between the liquid being measured in refraction of light caused the measurements.
In addition to the features of the traditional PRM-85, measuring range Brix0.00-100.00% larger, measuring accuracy Brix ± 0.05% and refractive index ± 0.00010 switches increase the minimum number of decimal features such as possible, easy to read color display panel.
Continuously maintaining a refractive index of various solutions, Brix and concentration and water, mixing ratio by installing in piping and liquid products, such as food and drug manufacturing plants, liquid supply for industrial equipment, cleaning equipment, dilution, mixing and mixing equipment.
Due to special processing of the prism surface and dirt, no adherence to the prism surface continuous measurement for a long time.




| Product spec _ _ _ _ _ _ _ _ _ _ _ _ _
Model PRM-100 Alpha
Cat.No. 3574
Tick mark type Refractive index
Brix
Temperature
Measurement items Refractive index and Brix (automatic temperature compensation according to the glucose solution)
One concentration (automatic temperature compensation according to the sample) and temperature (° C)
Measuring range Refractive index: 1.32000-1.55700
(Concentration) Brix: 0.00 to 100.00%
Resolution Refractive index (nD): 0.0001 or 0.00001
Brix (concentration): 0.1% Brix or 0.01%
You can switch back
Measurement accuracy Refractive index (nD): ± 0.00010
Brix (concentration): ± 0.05%
(*) When no reference material (molasses), rapid temperature changes
Temperature compensation range 5 ~ 100 ° C
(You can shed up to 130 ° C liquid for cleaning (although less than 30 minutes)
Welding solution for temperature -30-150 ° C
Light source LED (D line approximation)
Wetted parts material Prism. Sapphire
Prism stage. SUS316L
O-rings. Kalrez
Display items Refractive index, Brix, concentration, temperature ° C
Upper and lower limit setting The bounds of the control value can be set by key operation
Output RS-232C, current DC 4 to 20 mA
Output items One of the refractive index, Brix or concentration, and temperature ° C
Display method 7-segment LED
Alarm output Open collector output for the upper and lower limits setting
(Alarm output)
Cable Detector-operation indicator (power supply 12 V and RS-485)
Standard length 15 m (can be up to 200 m)
Power supply AC100V, 50 / 60 Hz
Waterproof protection grade JIS-C0920 7 splash proof-IEC standard 529 IP67
Accessories Detector - operation display connection cable (15 m standard)
Recorder for output (4-20 mA) (normal 10)
Clamp (for sample introduction, installation)
O-rings (for sample introduction, installation)
Dimensions & weight Detection of:10.8(W) x 26.6 (L) x 10.8 cm 3.3 Kg (D)
Operation display section:19.2(W) x 10.0 (D) x 24.0 cm 3.3 Kg (H)
Power consumption 30 VA
Preferences 5 to 40 ° C, 30 to 90% RH or less
Withstand voltage 0.98 MPa (10Kgf/cm2)



ATAGO ATAGO ATAGO ATAGO ATAGO measurement, [Tag] ATAGO.

160316-30 0189

Recently Viewed Products

See All >

Payment Methods

Available Payment Methods

  • Credit Card

Return Policy

Returns  

We are sorry that we don’t accept return of items you purchased from us.

 

Exceptions  


1. Initial failure of items or manufacturer’s defect

2. Wrong specification of items. Wrong colors, sizes, models and etc. 

※ Please be aware that returns and exchanges are accepted within 7 calendar days from receipt of item(s). Return request after the 7th day will not be accepted.

×

Not available for Overseas shipping

This product cannot be shipped to Us United States from the store.

Please contact the store for further information.

×

Delivery Rates : EMS (International Express Mail Service)

Ship to
Shipping Option
Note: Exchange rates are for reference only.
Back to Top