|This product can be ordered next I. 3 days-one week is delivered.
We are making more.
|Except for this product area * someFree shipping (shipping included)It is.
* Delivered to Hokkaido, Okinawa is the shipping becomes necessary because
Please contact us before ordering. We will inform the shipping.
|★ product description ★|
|OKKO FX (OTCO)
Germany production around the world who, with hand-made effect.
I think many Diablo bearing the name means "Devil" in any pedalboard in eye-catching orange body, Japan is already aware of. Contemporary deep gain wide Diablo is a mellow drive sound emitted by vacuum tube amplifiers and to ensure traceability to express the nuances of the players ' and wide dynamic range while at the same time using the clipping circuits have adapted.
OKKO effector, all in one single part and screen Builder himself, is handcrafted.
Overdrive (ROCK!) And
Clean boost (MORE!) The compound machine
Twin Sonic is low-is a complex machine with a moderate gain, Overdrive and clean boost. You can get even lower volume Overdrive sounds like the amplifier's volume is raised.
Some of the main features and characteristics
ROCK! or MORE!
Overdrive (Rock! on the switch)
You can get even lower volume Overdrive sounds like the amplifier's volume is raised. Also, for the very natural characteristics, frequency and character of the sound does not change. The TONE of the gain and Level to tweak the tone CUT control.
Clean boost (MORE! on the switch)
Clean boost signals up to 20 dB. PUSH the boost and increases the gain and sustain in overdrive. More boost and increases the volume of the output after the overdrive. It is possible to boost at the same time.
Pressure to 18 VDC internal voltage HEADROOM switches
HEAD ROOM switch is set to Hi voltage 18 v a.c., expands the dynamic range. As a result, more spacious headroom and tight low yields area. * Do not need to change the 9 V power adapter or batteries.
Adjust the depth of the distortion. Clear in the guitar volume control set to distortion and produces sound.
Adjust the mids. 9 o'clock position is almost flat, but high and low range varies according to the depth of the distortion.
Phat highlighted medium-range and turn to the left, a rounded sound.
Turn right and highlighted the mid and high range, punch and presence of sound.
Turn to the right and high range (1.25 kHz bandwidth) will be cut. The equivalent of a vintage VOX amp CUT control.
Adjust the output level.
Boost input signal by 20 dB. Boost section, "MORE!" Works even when you turn the switch only. Located in front of the Overdrive circuit can be used as a clean booster. Also, the "ROCK!" With a turn, they can further strain.
Boost the volume after the Overdrive circuit. You can set the volume and distortion suitable for solo play, combined with the PUSH.
* The "ROCK!" And "MORE!" Work while it is turned on at the same time.
The Overdrive on/off switch. This is true bypass specification.
Boost on/off switch.
Is the ability to switch the operating voltage of the circuit in the body. When you switch to the HI circuits are powered by +18 V. (You don't need to change the battery and power adapter. )
LO: a soft sound punchy deep compression is. It is recommended when playing in combination with low-output pickups and small volume.
HI: this is the sound compression is shallow and wide dynamic range. Dynamic punch and a tight low range is the characteristic sound. It is recommended when connecting to playing in combination with the high-output pickups and loud, distorted amp.
Body trim pot
Adjust the tone of the boost circuit. Turn right at high frequency the loss.
Power supply: 9V battery (006 P) or DC9V power supply (Center minus)
Dimensions: W 95 x H120×D55mm (* including protrusions)
Weight: 367 g
This product cannot be shipped to United States from the store.
Please contact the store for further information.