-Vibration reinforcement measures drive case effectively attenuate the rotational vibration of a drive |
RP-EC5-U3AI, CD ripping-vibration reinforcement Kit with the reputation to chassis-based of RATOC USB3.0 5-inch drive case "RS-EC5-U3" the increased damping drive case. CD as disc ripping lighting, rotation vibration damper USB3.0 external drives can be used. |
 |
Blu-ray Disc drives, DVD Multi optical drive support |
This product may be mounted with SATA connection DVD Multi drive or Blu-ray Disc drives (tested at 16 x speed Blu-ray Disc drive). |
Plug and play with USB 3.0 cables |
1-port USB 3.0 connector on the back of the product, equipped with. In the attached cable, connect the USB 3.0 port on your computer. Future increasingly go high speed and high-performance optical drive performs well. |
RIP drive optimal vibration control |
You can favorite optical drive to work in the best environment. |
 |
1) |
To play the music and vibration is derived. * Disk rotational vibration, sound, etc. To minimize impacts from vibrations caused by playing music for the implementing measures for the installation part. |
2) |
As internal vibrations by optical drive works with the insulator material internal loss and footprint reduction to attenuate. |
3) |
Position of the drive increases in the foot part measures the operating vibration will increase. |
RIP can downplay the vibration caused by different external factors (sound waves) and CD player, etc.. This product is based on positional relationship of location be equipped with chassis and optical drive. Control excessive vibration occurs in the optical drive installed (figure below on the right) to the effective damping vibration. Under saved on the CD sound better than ripping ability. |
 |
Adopt a structure between the 5 inch case with built-in optical drive to effectively dampen vibration like the above product sheet-type insulator is located down inside the case. Providing that the attenuation of vibration caused by this structure to work, optical drive optical drive surface low quickly. Also in the enclosure to install insulator sleeve made of ABS for conventional gravity than Fe1.6t steel is used. To demonstrate the performance of the insulator by changing to a solid sleeve case with transmitting to the entire cavity to prevent. |
 |
* Vibration-damping steel INOAC celldamper "BF-150" inside the employs. |
|
Product specifications |
The name |
-Vibration reinforcement for ripping CD 5-inch drive case |
Model number |
RP-EC5-U3AI |
Supported operating systems |
Windows 10 / 8.1 / 8 / 7 * 32-bit and 64-bit compatible with both |
Compatible models |
USB3.0 port a Windows PC with a standard or our USB3.0 interface card * Can connect to Windows PC was equipped with USB 2.0 transfer rate 12 Mbps and 480. |
Interface |
Vs PC:USB3.0 |
Connector |
Vs PC:USB3.0 Standard-B Signal-to-drive SATA connector will not be supplied 7-pin SATA power connector 15Pin(3.3V,) * Unable to connect power connector 4-pin drive. |
Transfer rate (theoretical value) |
Vs. PCs: SuperSpeed 5Gbps High-Speed 480Mbps, 12Mbps Full-Speed, Low-Speed 1.5 Mbps 3Gbps/1.5Gbps-to-drive SATA |
USB class |
USB Mass Storage Class - Bulk Only Transport support |
LED |
Electric Source: green light |
FAN |
40 mm (rear cases) |
Power supply voltage |
Input: AC 100V-240 V 50 / 60 Hz Output: DC +5 V 2. 0A DC +12 V 2. 0A |
External dimensions |
192 mm (W) x 274 mm (L) x 60 mm (H) (excluding protrusions) |
Weight |
Approx. 3.0 kg |
Material |
ABS (front of chassis), steel (enclosure, internal chassis) |
Color |
Black |
Contents |
RP-EC5-U3Ai body USB 3.0 cable (1.0 m) AC power cord 5-inch drives for mounting screws (metric). Rubber feet Damping material for optical drive User's manual / warranty |