Shop Japan. We ship worldwide, bringing Japan directly to you.

DAITO waste (plastic model) for absorbing smoke incinerator (abolition hahou and structural standards and Saitama prefectural Ordinance fit type) MDP-200SKN (MDP200SKN)

Buy it and earn 12190 points! About Points
$ 10,834.47 (¥ 1,219,000)
Actual price may vary according to exchange rates.
Payment will be charged in yen
Please select options before adding to cart.

Product Information

[DAITO incineration furnace Saitama prefectural Ordinance fit MDP-SK type (waste plastic response, absorbing smoke type)]

MDP-SK-type is a model suitable for incineration of plastics suitable for Saitama prefectural Ordinance.



Regulatory-compliance assurance
Conform to all laws and regulations concerning incinerators. If there is a guidance from the Government, responsible manufacturer.

Thermometer box standard
Standard thermometer box matches the Saitama prefectural Ordinance requirements.

Saitama prefectural Ordinance compliance
Saitama Prefecture is hardest incinerator regulation in the country.
And conducts of the County Ordinance (4/1/2002) and later also delivered. Troublesome required documents are served in the manufacturer.
Is this product suitable for Saitama Prefecture's Ordinance to the guests.


* Saitama prefectural Ordinance summary

 1. To install required notification.

 2. Incineration capacity less than 30 kg/h (fire floor 0. 3 m Less than-combustion chamber volume 0. 42 m Less than) the notification only.
   * Excluding the Miyoshi-machi

 3. Incineration capacity 30 kg/h or more but less than 50 kg/h (fire floor 0. 5 m ) Of when
   a. Determination of hydrogen chloride, particulate twice a year;
   b... Requires installation of temperature recorders and ash out cleaner.

 4. If the incineration capacity 50 kg/h or more but less than 100 kg/h
   a. Determination of hydrogen chloride, particulate twice a year;
   b... Requires installation of temperature recorders and ash out cleaner.
   c... Measurement of dioxin required.

 5. If the incineration capacity 100 kg/h or more but less than 200 kg/h
   a. Determination of hydrogen chloride, particulate twice a year;
   b... Requires installation of temperature recorders and ash out cleaner.
   c... Measurement of dioxin required.
   d... You must plant and ancillary facilities (filter bag, gas cooling, Co pH meter).

Suitable for incineration of waste plastics
It is suitable for incineration of waste tend to smoke, such as plastic, vinyl and oil cloth.

Swirl combustion complete combustion
Balance the air nozzle in the furnace can often supply air swirl combustion and complete combustion.

High smoke and dust capacity
W cutting dust collection system with burner, will demonstrate the high smoke and dust capacity.

Adoption of the new door locks
Adoption of a newly developed door operation is improved.

Waste plastics incineration feasibility
Type of material Display materials The main waste and waste Suitability
Low density polyethylene
High density polyethylene
PE (LD) Packaging materials (bags, plastic wrap)
HD-PE Container boxes, packaging (film)
Polypropylene PP Auto parts, dinnerware, containers
Polystyrene foam (General) PS Core cases, tableware trays, mats
Polyethylene terephthalate PET PET bottles, egg cartons
Polyamide (nylon) PA Gears, fasteners, and retort packaging
Unsaturated polyester UP Corrugated sheets, helmets, buttons
Butadiene synthetic rubber SBR Rubber hoses, tires
Urethane rubber UR Vehicle bumper
Oil filter Oil element
Polyurethane PUR Cushions and insulation
Epoxy resin EP Electrical parts, paints, and adhesives
Vinyl chloride resin PVC Pipe, hose, sashes, etc. ×
Note: basic knowledge of plastics recycling, plastic processing Association brochure

Waste swept comply fully with 5

CLEAR1 Air shut-off quantitative loading device (disconnected air recycle quantitative input is possible)
 
CLEAR2 Thermometer
CLEAR3 Burners and help fuel system (with thermometers and burners keep burning gas more than 800 degrees)
CLEAR4 Blower
CLEAR5 Dust collection system (blower and W cut dust collection system in electrostatic precipitator efficiency)







 * Manufacturer direct and order products in the 'payments ' payment in advance please.
  • Please note that you won't be able to use cash on delivery.

 * Unit price other freight mounting expenses separately under the table is required.
  -When sending order confirmation mail postage corrections on request let me guide.
  VA staff through delivery and installation, we thank will be manual.

 * Standard delivery time is about 4 weeks before and after.
  • Tuck the holidays or if the delivery time is stretched during the peak time.

 * If options you want ago your request for quote.
  -Please note cannot be added after confirming your payment option.

 ※ Product photos, MDP-200 SKN in common of all sizes and uses.



 DAITO co., Ltd. of waste plastic for absorbing smoke incinerator is.

 All the laws and regulations on the structure of the incinerator
 It is a conforming safety structure standards fit type of incinerator.

 Structure standard conform type incinerator is not covered by laws and regulations system
 Now you can use after installation, notification or permission is required.
 However, some local ordinances by notification if needed.

 Construction standards conformity guarantee the guidance from the Government
 Responsible for any company, even if it was, we will respond.

 MDP-is a model suitable for incineration of plastics suitable for Saitama prefectural Ordinance.
 Product information please see the Guide at the top of this page.


Incinerator "MDP-SK series" lineup
Model Burning capacity Product page
MDP-50 SKN 8 (3) kg/h Click here
MDP-100 SKN 14 (5) kg/h Click here
MDP-200 SKN 18 (7) kg/h Click here

 * MDP-SK model listing page  Click here

 * All incineration furnace list page  Click here




List of specifications
Model MDP-200 SK (MDP200SK)
Burning capacity 7 kg/h (plastic)
18 kg/h (Martin Heidegger)
Outside dimensions Height 2000 mm width: 1000 mm deep 1290 mm
Furnace size Height 1360 mm width 710 mm deep 700 mm
Inlet 400 mm width: 400 mm
Input equipment opening 200 mm width 400 mm
Fire area 0. 29 m
Primary combustion chamber volume 280 l
Chimney height 3190 mm
Chimney diameter 190 mm
Air blower output 0. 4 KW
Burner output 0. 1 KW
Burner fuel oil 3. 8-liter/h.
Voltage / current It's A 100 V/15
Oil tank 40 litres
Weight 540 kg
How to work with Thermometer box (temperature control and timer)
Combustion system Bed combustion system
Umbrella Arch umbrella
Option (not included) On doors, refueling mouth locks
Arch umbrella Alma processing, tank capacity up
* Burning capacity
 Plastic plastic fever of 41. Measure 9 MJ (10,000 kcal)
 (General waste) is General mixed heat volume 16. (4000 kcal) 7 MJ/kg, based on
 Are calculated.
* Subject to change for improvement without.
* Please note imitations
* Burner fuel oil is reduced by automatic control.

Fares cost of replacing
State/Province Replacing the cost of fares
Saitama Prefecture 54000 Yen
Please note:
 * Installation cost of freight transport, set up, includes basic instruction description expenses.
 * Above shipping table differs from outlying districts, and a quote.
 * Authorised conditions and things truck and tow car 横付 work where possible.
 * These below items charged separately on the estimate.
  (Specification change, removal of existing furnace and primary wiring and plumbing, and other construction)

Recently Viewed Products

See All >
×

Not available for Overseas shipping

This product cannot be shipped to Us United States from the store.

Please contact the store for further information.

×

Delivery Rates : EMS (International Express Mail Service)

Ship to
Shipping Option
Note: Exchange rates are for reference only.
Back to Top