-This kit car wall machining is required.
As you already car wall hollow wall hole machining and even a few millimeters larger
Electric screwdrivers are on sale at home centers or
(Up to 12.7 mm enters the tannat with reamer's expansion also OK)
Is the range you can easily use the process.
-From the top of window frame 4 cm each height you can change （ immediately ノブネジ the long holes type freely ）.
-This kit as a service white pad and pad fixed to Velcro is included.
-Front load attach with clamp railing on the second-row seats. （ are put in the Kit. ）
* By the way column 3 in tannat, front load and after the load bars on W mounting (short or snowboards loading) is not on the car body structure. CAP career 200 factions Hiace for SGL セットキット is possible.
* Car Wall hole
Extension work need not car carrier
[CAP Kit] 200 factions Hiace Super GL SET Kit Also available at our shop.
100 Hiace SuperGL, 100-CD, car carrier for DX.
Car carrier [ナミノリコゾウ Kit] Wide bracket bracket turn nut screw
200 Factions Hiace SuperGL mounting method
（ railing on the second-row seat is fixed bracket and 3-row cargo is ステーターン nut straight stop ）
Below are the processing steps
Use hollow wall of the load compartment above the plastic cover on the inside.
Electric drill at home center around 3000 yen on sale
Hole open for private fittings
（ was more than 12, 7 mm テーパーリーマー, tannat is size home Center at 980 yen. ）
In extending also OK.
Drilling only asked him to repair shop will do it cheap.
Remove the plastic cover, flat-blade screwdriver. It is quite stiff.
It's a 12 electric drill holes seem to the average. It broadens to 7 mm diameter.
So biting and sudden pressure to drill teeth little by little down holes in our time please.
Turn nut into the hole.
12, 7 Mm in diameter hook up snug tannat of thin metal piece into the hole,
Protects against holes were extended in the fall turn nut.
If the hole was too, bitten by large washer 12, 5 mm inner diameter
Turn nut does not fall in the hole.
After confirming tannat enters the hole just tannat solid inserts up to below the roof lining.
Follow the mounting instructions the washer and bracket bracket down turn the tannat with bolts. （ shooting help FIREMAN)
Be glued rubber plate for securing the bracket to stay behind.
Bracket attach the load bars.
Replace the fixing bracket type to the railing on the second-row seats.
It is good even hook bracket expressions.
Because longboards, the air conditioning vents can be used
Adjust the length in the bracket joint fittings. （ shooting help FIREMAN