|Seeking safe jump Starter features|
|1,960 high density electrical energy in lithium-ion batteries, so using incorrectly a dangerous accident may occur. Protection product to confirm connectivity and battery jump Starter cable control box mounted detects the battery status, the LED and buzzer warning before operating to prevent dangerous reverse connection or short relieved, are available.
|When replacing the battery backup power capabilities|
|Vehicle electronic control in recent years to stop the power supply and power Windows, power sliding door, some electronic equipment and operation glitches and so will require initial configuration on replacing the battery backup power supply is required. This product is available as a back-up power to OBD II cable is attached.
If you can't perform a backup operation cannot draw power from the DLC (vehicle side connector) depending on the vehicle.
|Battery type||Lithium-ion battery|
|Maximum current||Jump start output: 600A(peak)|
|USB output: 2A|
|DC12V output: 10A|
|Charger input||DC15V/1 A|
|Jump start current||300A|
|Jump start vehicle||less than 4000 cc 12 V gasoline-powered vehicles|
|less than 3,000 cc 12 V diesel|
|Charging time||Approx. 8 hours|
|Protection circuit||Jump start (low-voltage, short circuit / overload currents / reverse current / reverse connection)|
|Any other output (overload / excessive discharge)|
|Cycle life||About 1000 times|
|Using temperature||(Environment)-10 ~ 55 ° c (body) 0 ~ 45 ° c|
|Charging temperature||0 ~ 40 ° c|
|Storage temperature and humidity||-10 ~ 45 ° c 70% RH or less (However no condensation)|
|Dimensions||230 mm (H) x 87 mm (W) × 27 mm (D)|
|Mass||Approx. 670 g|
This product cannot be shipped to United States from the store.
Please contact the store for further information.