Shop Japan. We ship worldwide, bringing Japan directly to you.

Best selling standard type hot air machine

Shure hot air machine PJ-206A1 [r20]

Buy it and earn 140 points! About Points
$ 124.73 (¥ 14,000)
Actual price may vary according to exchange rates.
Payment will be charged in yen
Our store-limited 500 yen OFF coupon
The C.O.D. is not available
Please select options before adding to cart.

Product Information


Shure hot air PJ-206A1 best selling standard type
Using variety, suitable for all your
• Peel off adhesive sticker seal carpet, etc.
-Shrink tube and shrink film shrink
-Drying of paint, PuTTY, resin and PVC tube bending process
-From heat shrink processing acrylic moulding, welding sheet, dry work



Specifications

Type No.
PJ-206ko1

PJ-214A

PJ-208A1
(At-11 AT-21)
Rated power consumption 100 V 1000 W 100 V 1020 W 100 V 1000 W
Switch 3-stage
(Off, blower, hot air)
4-stage
(Cutting, progressive, weak and strong)
3-stage
(Off, blower, hot air)
Hot air temperature 450 degrees 250-600 degrees
(Variable)
450 degrees
Air (m3/min) 0.18
Wind (m/min) 1000
Dimensions
(Body diameter × length × height)
70 × 213 × 191 70 × 253 × 200 70 × 213 × 191
Weight (g) 750 950 750

Type No.
PJ-210A

PJ-230

PJ-218A
Rated power consumption 100 V 600 W 200 V 3,000 W 100 V 1200 W
Switch 3-stage
(Off, blower, hot air)
Hot air temperature 450 degrees 600 times Electronic temperature variable
Room temperature to 500 degrees
Air (m3/min) 0.125 0.51 0.3-0.4
Wind (m/min) 400 450 900-1200
Dimensions
(Body diameter × length × height)
70 × 208 × 177 96 × 302 × 96 96 × 290 × 96
Weight (g) 550 1200 1100

Type No.
PJ-216A

PJ-215A

PJ-203A
Rated power consumption 100 V 1200 W 100 V 400 W 100 V 300 W
Switch 3-stage
(Off, blower, hot air)
Hot air temperature 600 times 500 degrees 310 times
Air (m3/min) 0.14 ──── ────
Wind (m/min) 290 ──── ────
Pressure (mmAq) ──── 170 130
Dimensions
(Body diameter × length × height)
96 × 280 × 96 96 × 320 × 96 70 × 260 × 191
Weight (g) 1000 1000 740

Attachment nozzles
When it comes to buying attachment nozzles, please contact us.



Shrink tube cutting
I'm wearing at-11 attachment on the PRA get the shrink tubing shrink processing. Without rotating the workpiece with a shrinkage tube at-11 attachment rotate the hot air, so a whole can constrict, is very useful.


Melting, welding, and drying
Dry ice breakup, defrosting, solder melting, coating, welding. Pictured above is dissolved and bad IC solder is removed is.


(Piece of PVC) welding
Prajit AT-31 attachment fitted, and welding PVC sheets (P.V.C) this is. Advance width of 30-50 mm, PVC overlay. Put the AT-31 nozzle between according to the overheating at the same time on both sides. Nozzles move at constant speed, softening the surface by applying pressure with the roller from the top, the welding.


Welding
Using speed nozzle PJ-203 A photo on is that weld. Is that prayeth without pressure this time, weld stick to pressure. Can be welded easily anyone if you find send PRA get decent speed after the. Welding type (PJ-203 A-PJ-215 A), at-22 (welding nozzle) would need in other hot machine that can be directly mounted AT-43.

Nozzle attachment viscosity table below nozzle attachment is model of heater power usage restrictions, so please refer to 10 minutes.

Attachment nozzle adjustment table



The * AT-43 PJ-215 A, other than A, 203, at-22 is required.
* PJ-218a, PJ-216 A standard heater 1200 W. Please order separately and other heaters.
* Notation attachment can be mounted to PJ-230.


Attachment dimensions


Recently Viewed Products

See All >
×

Not available for Overseas shipping

This product cannot be shipped to Us United States from the store.

Please contact the store for further information.

×

Delivery Rates : EMS (International Express Mail Service)

Ship to
Shipping Option
Note: Exchange rates are for reference only.
Back to Top