Shop Japan. We ship worldwide, bringing Japan directly to you.


 

[abroad extreme popularity! New starter set of WISMEC]

WISMEC PREDATOR 228 & ELABO original starter set

Buy it and earn 128 points! About Points
$ 114.07 (¥ 12,800)
Actual price may vary according to exchange rates.
Payment will be charged in yen
Please select options before adding to cart.
Shipping Options: Details
ClickPost
Payment Options: Details
Credit Card, cash on delivery

Product Information


[product explanation]
It is a starter set of WISMEC company which appoints an American designer, and fires hit products.
As for this product, it is produced atomizer, MOD together by a hand of Mr. product designer Sinuous Designs company Jon Fairbanks.
I work by grasping the power button located in a symmetry design, and being crowded, and that kind of inside can see the LCD monitor anytime because there is it, and the well thought-out design which can understand so as to touch it if I touch it is the best part.
The body material is comprised of the metal which I did well, too, and the metal surface is finished carefully.

※A variety of modes with the latest control board※
TC (mode to usually temperature-control)
After having changed it to a mode to a coil, I can set it to 200-600℉ (100-315 degrees Celsius) by pushing the right and left button of the screen bottom.
Because the output is adjusted when a coil arrives at the setting temperature, we do not have to worry to burn with a coil.
A correspondence coil: Ni, Ti, SS

VW (electricity setting mode)
I can set it to 1W~228W by pushing the right and left button of the screen bottom.
I measure a resistance level of the atomizer and I calculate the voltage to arrive at the setting electricity and output it.
I can enjoy the linear feel that there is not time lag from setting to reflection at all

TCR (resistance temperature coefficient designation temperature management mode)
A resistance temperature coefficient: It is a mode for enthusiasts to temperature-control whom I directly input TCR (temperature coefficient of resistance) and temperature-control.
メーカープリセット値では満足いかない方はこのモードでセッティングを極めてみては如何でしょうか?
※The general user does not have the need to use this mode.

Mode change
A mode is replaced by pushing the right button after pushing the power button three times quickly. (an applicable item flashes on and off)

※The depression boost technology deployment ※
Even the resistance price that is higher than MOD of the class can maintain the best output by depression boost technology.
※When I use it, I perform setting to coil properties, and the use by the best output, please really wait.

※Direct charge with the MicroUSB cable ※
Direct charge is possible with MicroUSB cable used with a smartphone or a PC.
In addition, shortening in a charge time is possible by using the battery charger of 2A output types such as the tablet use as I cope with fast charging at 2A.

※How to put in power supplies※
ON/OFF of the power supply is replaced when I click the power button five times quickly.

※Cut-off circuit※
Electricity automatically stops when I keep on having pushed the switch in succession for ten seconds (cut-off)
For example, an atomizer may not break down even if a button is pushed by mistake while I carry it.

※Setting lock※
ON/OFF of the lock of the setting is replaced in a state switched on by pushing "+" button and "-" button at the same time more than two seconds.
Setting may not change even if I push "+" button or "-" button when I am locked. When you fix favorite setting, please use it.

※Multi-function display※
I can adjust each indication item every window finely.
・A battery residual quantity: Icon, number change
・User information: Outbreak electric current, puff count, time change

※It supports firm ware update※
I download the latest firmware from the WEB site of WISMEC, and installation is possible in the body.
※A PC is necessary for this work.

※Top Phil mechanism※
Conventionally, when I poured a liquid, I upset it → to remove an atomizer from the body and it was resolution → infusion, but I took off a drip coffee tip and only slid the window of the atomizer upper part and came to be able to inject it.

※High output correspondence Triple coil※
The Triple (wire 3 main volume) coil of the resistance level 0.2 Ω level assumed high setting that recommended electricity was more than 40W; is designed.
The structure only by the coil unit to let air go through in a coil with Birch Carco yl (vertical winding coil) can enjoy 爆煙 which gangs are different from RBA (re-building double atomizer) in.
[recommended electricity]
Triple 0.2 Ω: 40-80W / NS Triple 0.25 Ω: 40-120W

※Coil screw stopper unnecessary NS mechanism※
When I fix a coil to the base, I usually turn coil in itself and screw it, but, as for this product, screwing it is unnecessary for structure to put NS Triple coil between in top and bottom because it is. I can minimize Beto Beto in case of the exchange. In addition, a base part can fix it with a screw by using Triple coil when I want to perform fixation same as before.

※The exchange of the coil simple substance is possible※
When a coil having built-in deteriorates, the exchange only for coils is possible.
[aim of the exchange]
When or it became burning continuously for approximately one month
-- - - that a coil for the exchange is this
WISMEC Triple coil (genuine coil)

※Atomizer with the air flow adjustment function ※
The air flow adjustment system which adopted flow quantity of the air for a design is carried.
I can regulate flow quantity of the air at the time of the inhalation by turning a ring for the air flow adjustment in the lower atomizer.

※ The PYREX glass tank which resists a menthol-based liquid※
When the tank made of plastic puts a liquid of the strong menthol system and citrus fruit system, it is eroded and may crack, but this product is unnecessary for the erosive worry that is a product made in heat-resisting glass (PYREX) not plastic. In addition, the appearance is very clear, too


[our store original present! ]
・Domestic liquid "glaft"3 ml of five sets
Maximum electric discharge electric current 40AThree 18650 battery made in Efest
・Outlet USB adapter (a design may be different from a photograph) of the 1A output which is usable for the charge of the smartphone
A present! It keeps all the necessary articles!


[specifications]
※The body※
Setable temperature area: 200-600℉ (100-315 degrees Celsius)
Output electricity: 1~228W
Specifications minimum resistance level: 0.05 Ω - 1.5 Ω (TC mode) /0 .1-3.5 Ω (VW mode)
Use battery: 18650 battery size (length x width x height) more than maximum electric discharge electric current 25A: 43.6mmx29mmx86 .7mm

※Atomizer※
Full length: : 52.8mm
A diameter: : 25.0mm
Capacity: : 4.9 ml (at the time of use of Triple coil /4 .6 ml (NSTriple coil use)
A tank material: PYLEX glass


[contents product]
・The WISMEC PREDATOR 228 body: One point
・Micro-USB cable: One point
・WISMEC ELABO atomizer: One point
・NS Triple 0.25 Ω coil: Nothing (finished embedded in the body)
・Triple 0.2 Ω coil: One
・User manual (English): It is for each one point to the body, an atomizer
-- Our store original - -
・ 3 ml of domestic liquid "glaft" five sets
Maximum electric discharge electric current 40A18650 battery made in Efest: Three points
・Outlet - USB adapter: One point
(a design may be different from a photograph)


※The one piece of article sale is this※
WISMEC PREDATOR 228 simple substance
WISMEC ELABO atomizer
※18650 our store recommended battery one piece of article sale is this※
18650 battery made in Efest company

Recently Viewed Products

See All >

Shipping Options

ClickPost

ClickPost ******** please be careful ******** 
By this dispatch method, you can use cash on delivery. 
Please be sure to choose "cash-on-delivery mail" in use of cash on delivery. 
******** please be careful ********

・If it is in Japan, it will arrive for 200 yen uniformly. 
・It is mailed to the post of destination two days after shipping roughly.
・In some cases, you will be sending a different manner depending on the size of the product.

Payment Options

Credit Card, cash on delivery

Credit Card We accept credit and debit cards.
The following credit and debit cards can be used:
•Visa
•MasterCard
•American Express
•JCB
•others
cash on delivery It ships within two business days after receiving an order. 
It costs 500 yen as a cash on delivery commission. 
×

Not available for Overseas shipping

This product cannot be shipped to Us United States from the store.

Please contact the store for further information.

×

Delivery Rates : EMS (International Express Mail Service)

Ship to
Shipping Option
Note: Exchange rates are for reference only.
Back to Top