There are two kinds of lineups in CLECOOLV.
The main difference is a street of the following tables.
I judge compressor movement from outside temperature and setting temperature and work.
When outside temperature arrives at the setting temperature, I change it to ventilation movement automatically and reopen air conditioner movement when outside temperature rises.
It is a mode planning an air conditioner and energy saving.
Time when setting temperature is lower than outside temperature: I operate a compressor and I cool it and work.
Time when setting temperature is higher than outside temperature (I agree): I turn off a compressor and I send air and work.
I cool it intermittently and work and dehumidify it.
The basic movement becomes the air conditioner, and the cold wind begins to blow at the same time, too.
As this continues dehumidification movement regardless of outside temperature, I can use this dehumidification mode when I want, anyway, to cool it and to work.
I operate only a fan and circulate indoor air.
When I reached the temperature that I set in the air conditioner, it becomes the ventilation state temporarily and suppresses the electricity consumption.
●Auto (automatic mode)
It is the mode which automatically changes movement to the cause at outside temperature and setting temperature.
I regulate "quantity of wind" and, to temperature difference, balance indoor comfort and energy saving with choice of the "air conditioner" "ventilation".
When setting temperature is lower than outside temperature (difference of temperature size): "An air conditioner" "quantity of wind strong", で works.
When setting temperature is lower than outside temperature (the difference of temperature small): I work in "air conditioner" "quantity of wind".
Time when setting temperature is higher than outside temperature: "The ventilation" "quantity of wind weak", で works.
●Quantity of wind
"Weak", the "strong" "inside" is から choice, and the quantity of wind comes.
At the time of the automatic mode choice, the quantity of wind automatically regulates it to temperature difference.
I can regulate the setting temperature between 16 degrees Celsius - 31 degrees Celsius and can change it every by 1 degree Celsius.
When outside temperature arrives at the setting temperature at the time of "air conditioner" "auto" choice, I turn off a compressor and work in a ventilation state.
When outside temperature becomes higher than setting temperature, I automatically reopen the operation of the compressor.
Because most of the electricity consumption of this container become this compressor, I can anticipate a large energy saving effect by stopping it.
The electricity consumption is suppressed when I make it easy to make setting temperature a little high, and to get up in the state mentioned above.
There are display indication and various operation buttons in the indoor unit front.
When the display switches it on, I turn on suddenly from the jet-black open place.
|It is attached to the remote control at current opportunity.
The setting of the timer is possible other than reshuffling and the temperature setting of the mode from remote control, too.
●On timer / off timer
When the time when I set it passes, power supply ON/OFF is automatically performed.
I have the usage such as what I operate before use and return absent from beforehand.
|When the air conditioner operates an air conditioner, water occurs.
This plane saves the water which occurred in the tank in the indoor unit once.
When I turned off time and the power supply that a tank is filled with water, I drain the outdoor unit side of water automatically.
As this automatic drainage draws water with a pump and drains it of water, it is not necessary to usually touch pitch differences in the setting place of the room outside machine like an air conditioner.
The automatic drainage hose lengthening from an outdoor unit is approximately 1m.
In addition, the hand-operated drainage hose which can drain the indoor unit side of water by manual operation in CLECOOL V2 carrying around type is accompanied.
|About the panel kit for the window (standard accessories)|
|It is attached the panel kit for the window to be able to more easily put a drain hose through this plane.
I put a drain hose in the panel kit for this window and can cut off the simple space by putting it between the gaps of the window.
Because the panel kit for the window slides with these two pieces in 64cm in height, Class two pieces of 10cm in width, the gap can regulate length in total.
In the thing using this kit, I can introduce it into vehicle installation and a ship, the places where it seems to have difficult setting of the air conditioner including the simple warehouse such as campers.
For the person who is attached two pieces of panel kits, but lacks length morePanel kit for the extensionI prepare もご.
※I may not fix the panel kit for the window by an installation place and the situation in a thing for the purpose of the assistance to put a drain hose through the gap to windows well to the last. I make this kit on the walls, and the laborers such as accessories come to need it.
|About difference in CLECOOLV2 / CLECOOLV3|
|I usually have characteristics unlike the domestic setting type air conditioner with me in CLECOOLV.
The connection of an indoor unit, the outdoor unit is done by initial state, and CLECOOLV is in a condition to be filled the refrigerant gas.
In addition, placing it on the floor can just use an indoor unit, an outdoor unit together, and it is not necessary to fixedly mount it on the walls.
Therefore, I can just manage it when I perform setting of constructing it and can introduce even the air conditioner setting that there is not experience willingly.
I make use of this advantage, and two kinds of types are in CLECOOLV.
|JP Post EMS||Your order will be shipped to you via Japan Post EMS. Japan Post is a speedy delivery service that delivers to more than 120 countries. With an effective tracking system and insurance program, EMS is able to offer a secure delivery worldwide. You can track your package with the tracking code provided and it will be delivered within a week. See estimated shipping fee|
|Credit Card||We accept credit and debit cards.
The following credit and debit cards can be used:
|Bank Transfer||We accept Bank transfers.
fter receiving the order confirmation e-mail, please transfer your payment to the bank account specified in the e-mail.
The total amount that you need you pay for is:
the amount of all items + the shipping fee via EMS + transfer commission
*All payments are made in Japanese Yen. Please check with your bank for applicable exchange rates.The commission will be paid by you.
*If payment by bank transfer is not confirmed within the date indicated in the e-mail, your order will be automatically cancelled.
|Alipay||We accept Alipay.
The “Payment Amount” is calculated as below.
The total amount that you need you pay for is:
the amount of all items + the shipping fee via EMS
Upon confirming your order, we will send you a link to make a payment via Alipay’s secure payment page.
You must finish the payment process before the deadline to complete your order.
Please check the payment process from the link here.
*Please note that if payment through Alipay is not confirmed by the date indicated in the e-mail, your order will be automatically cancelled.
This product cannot be shipped to United States from the store.
Please contact the store for further information.