Shop Japan. We ship worldwide, bringing Japan directly to you.

■ SW-R600-R SHIMANO shift switch (ISWR600R) ( Shimano Ultegra )

SW-R600-R shift switch SHIMANO (ISWR600R) ( Shimano Ultegra ) (bebike)

3X POINTS! Buy it and earn 261 points!
About Points
$ 78.98 (¥ 8,751)
Actual price may vary according to exchange rates.
Payment will be charged in yen
BackorderedDelivery time may be longer than normal.
ISWR600R
4524667827481
Okinawa, the remote island costs the postage separately
Please select options before adding to cart.

Product Information

SW-R600-R only [right] shift switch SHIMANO (ISWR600R) ( Shimano Ultegra ) [Di2 ULTEGRA 6700 series] [bicycle] [road]


Delivery takes 3-4 days. We inform you if you have inventory on Shimano.
Note: because this product is not in stock at basic we refuse returns. Please check on your own.
SW-R600-R [only in the right] shift switch SHIMANO (ISWR600R) (Shimano ULTEGRA) [6770 ULTEGRA Di2 series] [bicycle] [road motorcycle]


 ■6770 ULTEGRA( ULTEGRA) Di2 series electric shifting system■
Attachment means of the SW-R600-R shift switch


■When I build more SW-R600-R shift switches,
  A shift change in upper Kahn is enabled.

SW-R600-R
Parts only by being electric
I increase ratios of shifting with SW-R600-R wearing, and let's reduce the burden of the leg
Particularly, I should show an effect in long ride hill climb


<product contents>


・One SW-R600-R shift switch main body
・One rubber sheet small (A)
・One rubber sheet size (B)
・Two Thai rap


Installation to a <handlebar>
1.I attach an aim of the switch mounting location


I hit the mounting location of the steering wheel with the SW-R600-R shift switch main body and attach an aim
By later work Because I stick the rubber sheet small (A) and a rubber sheet size (B),
You should mark mounting location. I used masking tape this time.


2.I tear off old bar tape

I tear off old bar tape if I confirm the mounting location of the SW-R600-R shift switch main body.


3.I clean switch mounting location

I clean the mounting location of the SW-R600-R shift switch main body

Because I stick the rubber sheet small (A) and a rubber sheet size (B),
I removed fat with parts cleaner and a microfiber cross.
Because dust (waste thread) is hard to be left, the microfiber cross has good work characteristics.

■Attention
Depending on material including the carbon
Because parts cleaner may damage material, please be careful.



4.I confirm the position of the rubber sheet


Judging from riding posture
On the left side the rubber sheet small (A)
On the right side a rubber sheet size (B) 

I stick を

The image of the upper section: The SW-R600-R shift switch main body and the ゴームシート setting side
It becomes notched for the effect of the safeguard

The image of the lower berth: In the SW-R600-R shift switch main body
I placed rubber sheet small (A), rubber sheet size (B).

*The rubber sheet gains double-stick tape, and white paper is detachment paper


5.I stick a rubber sheet

The mounting location that confirmed で work 1 in an aim,
On the left side the rubber sheet small (A)
On the right side a rubber sheet size (B)

It is pasting けます on を steering wheel


6.I remove a marking of the switch mounting location


It is a thing of a pasting figure with a rubber sheet
I tear off the masking tape which made an aim of the SW-R600-R mounting location.

So that there is not the paste remainder; with parts cleaner and a microfiber cross
You should clean it.

■Attention
Depending on material including the carbon parts cleaner
Because you may damage material, please be careful.



7.I maintain Thai rap


I maintain two Thai rap that are attached to the SW-R600-R shift switch main body.
The direction to let pass, please refer to an image.


8.I attach a switch to a steering wheel


I tighten it to a handlebar by Thai rap and fix the main body of SW-R600-R,
Please cut an extra Thai lap in nippers.

■Attention
Please warn it not to fix cables by Thai rap together then.



9.I put the edge of Thai lap away


I turn Thai rap and put a square part of the lap beginning in Thailand in the square hole of the switch.


10.I remove a dummy plug

I pull out a dummy plug inserted in an ST-6770 dual control lever

When we are hard to outrun you by hand, let's pull it out using TL-EW02.


11.I attach a cable to ST -6770

The cable of the SW-R600-R shift switch main body using TL-EW02,
It comes in to an ST-6770 dual control lever.


12.Check the operation

Let's confirm whether a switch operates normally if we attach a cable.

■Attention
Please perform (at the time of shifting) at the time of operation check while turning crank by all means.



13.I fix a cable


I fix a cable to the steering wheel with plastic tape.
I turn the steering wheel to one cup of right and left then and a cable does not have a burden or will confirm it.


14.I wind up bar tape
It is the work end if I wind up bar tape


*The winding person of the bar tape makes follows an introduction
Please refer to it if good
Winding of the bar tape


■It is in condition to attach it





■Use parts
Bar tape : CeraItaly SMOOTAPE TEAM EDITION 2.5 [2.5mm thickness bar tape]
Steering wheel   : 3T (three tea) dropped handlebar ROTUNDO LTD
Stem    : 3T (three tea) stem ARX PRO [an angle:] +-17 degrees 】
Di2      : SHIMANO ULTEGRA Di2 set

■ Work item ■

Installation of the dual control lever
Installation of the front derailleur
Installation of the rear derailleur
Installation of the chain
Installation of the battery mount
Installation, disassembly of the battery
Connection of the electric wire
  F side junction, connection of junction (A)
  R side junction, connection of junction (B) decoration specifications (SM-JC40)
Adjustment of the rear derailleur
Adjustment of the front derailleur

Attachment means of the SW-R600-R shift switch

Latest Product Reviews (7)

ヒルクライム用に良いですね!
Posted by pl**** , 2015/06/03 23:44:56
スイッチだけでこの値段は高く厚みもあるので改善して欲しいのが本音ですが、ヒルクライム時にあると便利だと思います。個人的には贅沢な一品ですね。 (余談ですが2ヶ月前にアルテグラDi2を購入、もともと増設する事を前提に5ポート仕様にしてあり、接続のみですぐに使えました。)
無事届きましたが。。。。
Posted by のぼ***** , 2015/04/26 10:57:31
説明書通り装備しましたが動きません。初期不良? どうしたら良いですか?
楽ちんです!
Posted by yo****** , 2014/11/11 06:05:56
早速,富士4湖を回って来ました. 使い勝手は期待以上です. 「BeBike」さんには,注文から配達まで迅速なご対応をして戴きました. 機会があったらまたお付き合いいただきたいです.

Recently Viewed Products

See All >
×

Not available for Overseas shipping

This product cannot be shipped to Us United States from the store.

Please contact the store for further information.

×

Delivery Rates : EMS (International Express Mail Service)

Ship to
Shipping Option
Note: Exchange rates are for reference only.
Back to Top