|A plug becomes independent only in a front wheel or a rear wheel in a tire tray (horizontal storage)
It is supported to a 29-inch wheel by 20 inches of narrow path cars
The height of the vertical prop is rearranged to two phases of laying upons to the wheelbase of the bicycle to keep
The hook prevents the scratch to a rim with a foaming urethane cover
A supporting leg is attached to prevent damage or the injury of the house by the fall as the stands in the empty car become unbalanced.
For DS-2100 option, bicycles (29' er MTB フルサス specifications) having a long vertical prop extension bar wheelbase, there is the option (420-5015-00) of the vertical prop extension bar.
|The smallest available size is 20 inches.
It is stable and cannot maintain it to be in a condition to have loosened with the tire which is smaller than it close to a floor.
◆20-29 inches of correspondence, adjustment-type tire tray
|When you use it for 29 inches, please use the following 29er-adaptive prop extension bar|
29er-adaptive prop extension bar
|Setting size||570mm in width x 755mm in depth|
|Product weight||4.2 kgs|
|Term of a guarantee||One year|
◆Scratch simply and hook a front wheel
◆Two phases of height adjustment-type prop
◆Supporting leg for the prevention of fall
|■Please be careful■|
|・You do not choose the car model in particular, but a fender is the tire tray by mounting location and, in the case of the bicycle with the fender, may not use it
・In the case of a bicycle having a long wheelbase, surround father without the optional extension bar; may not be attached
・I cannot keep the verticality of the tandem
・As rail distance of the tire tray is 70mm, the model that the tire width is extremely wide such as FAT TIRE does not fit in into the tire tray.
・DS-2100 is designed to support only a bicycle. You sit astride the bicycle which you put on DS-2100, and please do not take it.
・Please establish DS-2100 on the level, flat floor.
・Please be careful about balance to prevent a fall accident when you put up a bicycle in particular and use it.
・The vertical prop which can coordinate height makes the upper section or the lower berth by the wheelbase of the bicycle. Please confirm balance of the bicycle well on this occasion.
・At first please regulate it before use at the right position that is correct to tire size using the anteroposterior red tire tray. I cannot secure the stability of the bicycle when I remain a wrong position.
・When I put up a bicycle perpendicularly, I cannot use a front wheel in the state that I did below. Please make a rear wheel the bottom by all means.
・When I set a bicycle in a horizontal position, for stability, I recommend that I set a rear wheel not a front wheel as much as possible.
・When you must put a front wheel by all means, please leave the body straight without turning it.
・The use of the bicycle with the electric assistant player may not get balance well by the position of the motor
I have a lot of inquiries that a screw loss does not match.
I do not tighten only one place, and the bolt screws four bolts to the place to be able to screw with a finger without using the tool in turn thoroughly and hopes that I have you close a book using a tool for the first time since you confirmed what you can screw it into without what catch smoothly and do it.
For example, please be careful as you may break a screw hole because you screwed it using a tool by force from the beginning without noticing it though I am out of a hole by tightening a bolt well, and fixing only one, and other bolts do not enter, or a bolt inclines.
A 10mm spanner is necessary for assembling
|Dimensions||<body dimensions> W 570 x D 750 x H 1,220 (the upper section) / 1,150 (the lower berth) mm
<setting size> W 570 x D 650mm
70mm in width in <tire tray>
|Correspondence tire size||20 inches - 29 inches|
|Color||I finish it with the white painting|
|Specifications, the appearance, the price of product may be changed without a notice.|
|▼Wanting you to be careful▼
■DS-2100 is not fixed to the floor and is only put on merely floor. Therefore a bicycle is equipped with vertically and a center of gravity is in state that it became higher and might fall down when I hit it carelessly and give you a shock. Please be careful.
■I just touch it on the wall and, on account of the movement to sprinkle a front wheel to a hook, may not install it depending on the body to be equipped with and wheelbase.
■The handstand that put a front wheel in the tire tray is in a state and cannot use it.
■Please use the tire tray holder after regulating it at the position that just matches real tire outer diameter. As the wrong position, in the case of lateral installation in particular, I might fall down without being stable in the bicycle.
■I cannot connect DS-2100.
■I may not place wheelbase vertically by bicycle (29 inches of MTB with the front suspension and long tail car) more than 1,150mm. The lateral installation does not have any problem.
|Please read one this thinking of the settlement by bank transfer.|
This product cannot be shipped to United States from the store.
Please contact the store for further information.