Legacy B4 BM9 intercooler piping kit
A maker: HKS | HKS
|Remarks||■It is the kit which makes turbine - intercooler, intercooler - surge tank the aluminum piping.
■It is the simple model who can change only the pipe around the intercooler which is easy to fall out in boost up.
■When I push forward tuning as a genuine intercooler, it is recommended without need to an introduction intercooler.
■The durability, safety is improved by a product made in aluminum pipe
The durability is higher than pure resin and I prevent the expansion, an explosion and contribute to safe improvement.
■It is improved the response by a product made in aluminum pipe
An aluminum pipe prevents the modification of the pipe even at the time of high boost and I prevent the expansion, the shrinkage of the inhalational air and realize response up.
■It is improved the beautiful sight of the engine room by buff alumite plating
The aluminum pipe gives surface treatment such as the buff alumite plating and contributes to improvement of the fashionableness in the engine room.
■By a straight layout, most suitable pipe diameter, a low pressure loss contributes to becoming it
I reduce a pressure loss by bending it as much as possible in comparison with chastity, and few, changing a number, and greatly taking R and can send inhalation air tight.
■I show it without spoiling the performance of the intercooler by a hose superior in pressure tightness
I use a hose superior in pressure tightness for the joint part. It is thought without being affected by heat, the pressure to be able to show 100% of performance of the intercooler.
■It is contributed to improvement of the workability by an approximately similar layout if pure
Because pure piping and layout are done approximately equally, the HKS piping kit does not need complicated installation work.
■A type: IC
■The number of the pipe constitution (book)
・IN pipe: 2
・OUT pipe: -
[conformity car model]
Legacy B4 LEGACY B4
BM9 AT use
|Car model||BM Legacy sedan B4|
|Keyword||Legacy bm legacy bm5 bm9, HKS, intercooler/piping/ intercooler / piping, aeroparts tuning parts after parts AERO|
|Bank Transfer||AutoStyle accepts Bank transfers. After receiving the order confirmation e-mail, please transfer your payment to the bank account specified in the e-mail.
*All payments are made in Japanese Yen. Please check with your bank for applicable exchange rates.
*If payment by bank transfer is not confirmed within the date indicated in the e-mail, your order will be automatically cancelled.
This product cannot be shipped to United States from the store.
Please contact the store for further information.