MSRP is provided based on the maker's catalog
LUXMAN L590AXII 6/2015 end of sale
Electronic controlled attenuator LECUA+ODNF latest version 4.0 installed.
The mark 2 model upgrades of power supply and preamplifier circuit significantly, increased the degree of perfection.
NET A grade integrated amplifier L-590AXII birth.
■ electrical circuit and high ODNF Ver4.0 capable three-stage distortion characteristics of the region improved significantly NET Darlington 3 parallel push pull configuration of grade 30 W+30 W (8 Ω) rated output.
• Power supply capacitor blocks high regulation power transformer primary winding line diameter up and LR independent 80000 Μf (F×8 10000 µm) combined with highinascia (high inertia).
-Discreet buffay circuit of the flagship model C-900u equipped with preamplifier output stage and improve the driving force for the power amplifier.
-88 steps to realize a smooth volume control amplifier integrated type, electronic controlled attenuator new LECUA1000 with.
Low impedance relays with 4 contacts connected in parallel large speakers and speaker terminals by the damping factor from 240 to 320 sharply up.
New design the input audio signal to speaker output up for shortest route to the Beeline and construction.
-Internal wiring uses proprietary OFC wire transmission of natural achieved in non-plated wire with each core spiral loop shield.
-Round pattern adopted for current transmission for smooth, delicate music signal flow circuit board wiring.
-Custom parts of resistors and capacitors are suitable for high-end products employed in abundance.
-Built-in are assembled here for enjoying a high-grade vinyl record playback without fonoanpu buy MM / MC..
-Equip LR balance adjustment using a volume shift functions by electronic control bus / expression treble tone control and LECUA on the front panel.
-(Only on the remote control, on/off possible) equipped according to psychoacoustic characteristics of volume tandem of loudness feature.
To allow coexistence of bi-amped configuration with power amplifiers or AV system, pre / power separation: separate switches.
■ adopted new meter unit of instrument panel mechanism, auxiliary equipment and new design and high response LED lighted needles analog meter.
-Due to current chassis grounding impedance rise to shut out the independent construction rupresshiresi structures.
-Easy to attach speaker cables very heavy, Y rag and banana pin inline (same characteristics of LR) layout speaker terminals (A, B2).
-Eliminate unwanted external vibration, body weight weighs gradient cast-iron insulator (painted black).
Gold-plated to mounting external power cable with the headphone output useful for late-night listening, non-magnetic process AC inlet.
-Brushed a delicate body Blaster white color top.
-Comes with a luxman standard power cable JPA-10000 non twist structure with aluminum and high quality remote control compatible CD player operation is possible (with Mark polarity).
Continuous power 30 W+30 W (8 Ω), 60 W+60 W (4 Ω)
Type the recording input/output, separate input/output line 4 line, phono 1 line (MM / MC switch), balance line 2, recording input/output x 1, separate input/output x 1
Speaker output A, B2 lines (AB at the same output)
Bipolar-3 parallel push pull amplifier circuits, output configuration ODNF4.0
Input sensitivity / input impedance PHONO (MM): 2.5 mV / 47 k Ω, PHONO (MC): 0.3 mV / 100 Ω the LINE: 180mV/47 k Ω
Total harmonic distortion factor less than 0.005% (1kHz/8 Ω), less than 0.02% (20 Hz ~ 20kHz/8 Ω)
S/n ratio and frequency characteristics more than LINE:107 dB, 20 Hz-100 kHz (+ 0,-3.0dB)
Comes with unit front panel power switch, speaker selector (a/b) and cartridge (MM/MC), REC ON / OFF, input selector, volume, headphone jack / tone control (BASS/TREBLE), balance, monitor, separate straight line (only in the remote control is operational) mute, subsonic, Mono, loudness, meter illumination [rear panel] input/output terminals, ground pins, balance phase switch, AC inlet, AC Outlet x 2
Power consumption 310 W (electrical equipment safety law), 230 W (no signal time), 0.4 W (standby)
Dimensions, weight 440 (W) x 193 (H) x 463 (including knob 20 front and back pin 37) (D) mm, 28.4 kg
Accessories remote control (RA-17A), power cable (10,000 JPA-: polarity mark)
* This product line cables are not included. Please purchase separately.