Dual mono design pursues the freshness of the music.
The sublime heights of pure audio headphone amplifier.
By spans discrete configuration dual-mono amp
Sensitive headphones are compared to the speaker in power ratio about 1000 times and overwhelmingly high sensitivity, 1 mW power in sufficient volume obtained from freshness due to device to sensitively.
Examined the device, without using the op-EPA-007x avoid the freshness spans discrete minimum device configuration that ensures the freshness of the music.
Headphone jack for standard 6.3 mm headphone combined XLR /
Equipped with a completely separate wires for L/R balance cable type headphones can be connected to the direct XLR / Standard 6.3 mm diameter unisex XLR connector.
Because EPA-007x is a dual mono amplifier with separate power supply, headphone with Mono balanced drive are possible.
Give the headphones ideal braking force dump cont roller powered
Headphone impedance is 16? it is difficult compared to 600 Ω and speakers range widely, by orders of magnitude, which headphones best braking performance. Dump cont roller mounted on the EPA-007x is possible to set the perfect headphones with wide impedance barrier ion stopping power.
Sound image of bass playing with the softness of the sound will drive moderate braking force including the head past the community feeling that becomes possible, taste and feeling in my head were pinpoint sound effect to ease modestly as head offer a naturally becomes possible, even listening to for a long time to reduce stress.
High-capacity R-core transformer employed left independent power circuits
With large R core power transformers at first glance seem overkill. SiC Schottky barrier diodes rectifier diodes, high reputation for high quality loam, with independent left/right, has improved drastically.
Built-in protection circuits protect the headphones
Includes cutoff protector at power-on/off popping noise when transmitted to the headphones the headphones to protect abnormal behavior.
The all-aluminum, vibrated by no vibration and laissez-faire chassis
Aluminum non-ferromagnetic materials consist of front panel, 2 mm thick chassis, top, shaved that unaffected by interference from other high-strength enclosure delivers. Also has no slit using the chassis surface, distribute heat sealed.
Format dualmonodrivehead headphone amplifier
Analog input x 1 (RCA/XLR)
Output XLR / Standard 6.3 mm headphone combined Jack × 2
Input impedance 10 k Ω
Frequency response 20 ~ 100 kHz-0.5dB
For headphone impedance 16-600 Ω
Residual noise 50 V or less
Crosstalk more than 90 dB
Power consumption 1.5 W (100 VAC 50-60 Hz)
External dimensions (mm) 220 (w) x 57 (h) x 234 (depth)
Weight 2.0 kg
Accessories AC power cable