Delivery time approximately one month
[Product line] HG-JR 1500r/min series (low inertia, large capacity)
With type servo motor (low inertia, large) electromagnetic brake
The product-name] Hg-JR15K1M4B
[Response servo amplifier (all models)]
[Power capacity [kVA]]-22
The continuous characteristics]
Rated output (kW) 15
Rated torque [N / m]-95.5
286 [maximum torque [N-m]]
[Rated rotation speed (r/min), 1500
[Maximum rotational speed [r/min], 3000
[Permissible instantaneous speed [r/min], 3450
[Power rate at continuous rated kW / s] 271
Rated current [A] 38
The maximum current [A] 123
The regenerative braking frequency
Mr-J4 - [doses] 162
[Moment of inertia J [x 10 ^-4 kg / m ^ 2], 336
[Recommended load inertia moment ratio 10 times less
Absolute position (speed and position sensitive detector) and incremental share 22 bitencorder
Servo motor 1 rotation per resolution (4194304pulses/rev)
Heat-resistant class 155 (F)
[Structure] all enclosed non ventilated IP65 (IP67)
Ambient temperature: 0 ° C ~ 40 ° C (not freezing) and save:-15 ° C ~ 70 ° C (not freezing)
Ambient humidity 80% RH (not condensing), storage: 90% RH or less (without condensation)
No corrosive gas, inflammable gas, oil mist and dust atmosphere indoors (direct sunlight),
Altitude above sea level below 1000 m
Vibration: X 24.5 m / s ^ 2 Y: 24.5 m / s ^ 2
[Vibration class] V10
International compliance standards
CE marking LVD: EN 60034-1, EN60034-5 EMC: EN 60034-1
UL Standard UL 1004-1, UL 1004-6
CSA standard CSA C22.2 No.100
In the permissible axial load
Weight [kg] 97
Rated current [A]-
The electromagnetic brake specification
Format a spring actuated type (spring brake) safety brake
Rated voltage DC24V+0%-10%
Power consumption [W] at 20 ° C 32
Electromagnetic brake static friction torque [N-m] 127
Maximum braking work allowance
• Brake 1 per 5000 [J].
• 1 hour [J] 45200.
Electromagnetic brake life
-Number of times the 20,000
400-1 brake working volume [J]
-Recommended load inertia moment ratio: ratio of inertia moment of load for moment of inertia of the servo motor.
-Structure: excluding the shaft sealing. About shaft penetrations see about the annotations in a rotational servo MELSERVO-J4 catalog.
-Continuous characteristics, rated output [kW]: can cause unbalanced torque on shaft machine uses unbalanced torque is less than 70% of the rated torque is recommended.
-Regenerative braking frequency, MR-J4-[doses]: standard accessories GRZG400-_, and then use the Ω cooling fan (1.0 m ^ 3/min or more, 92 mm x 2) is the value of the case. Also, the [Pr. PA02] changes are required.
-Electromagnetic brake specifications: electromagnetic brake is designed to hold. Braking applications cannot be used.
-Electromagnetic brake life: time needed to readjust by braking so you cannot adjust brake gap on the electromagnetic brake life.
* Please note
-Cannot accept return this item would be taken against them.
-Heavy items will be prepared product acceptance please.
-Direct from manufacturer should because of weight.
And is not shipped from the company for cash on delivery (COD) is not available.
-Also not bundled with other products is permitted.