Spacer: cutting aluminum a6061-T6 forged, black anodized finish
Includes newly designed for use only by BMW! Remover guide shape was thought up later! Home and overseas will sell imported from the actual item!
:72.5mm (5Hx2) PCD:120 mm hub diameter
Choose the desired size thickness is 5
For BMW 10 mm spacers /PCD120mm-HUB72.5mm
For BMW 12 mm spacers /pcd120mm-hub32.5mm
For BMW 15 mm spacer /PCD120mm-HUB72.5mm
For BMW 18 mm spacers /PCD120mm-HUB72.5mm
For BMW 20 mm spacers /PCD120mm-HUB72.5mm
Long bolt are not included in this product. M12xP1.5mm Longboard sets productsClick here ↓
About the vehicle fit Please note!
Before you order Please make sure to
☆ thick 10 mm spacer for BMW Adaptive check! Protrusion of the hub on the vehicle side 12 mm please check. (cannot be attached in the case of more than 12 mm. ） ☆ thick 12 mm spacer for BMW Please note! Protrusion of the hub on the vehicle side less than 12.5 mm please check. (cannot be attached in the case of 12.5 mm or more. ） ☆ thick 15 mm spacer for BMW Please note! Less than 13 mm protrusion of the hub on the vehicle side please check. (cannot be attached in the case of more than 13 mm. ） ☆ 18 mm thick spacer for BMW Please note! Protrusion of the hub on the vehicle side less than 13.5 mm please check. (cannot be attached in the case of more than 13.5 mm. ） ☆ thick 20 mm spacers for BMW Please note! Protrusion of the hub on the vehicle side less than 13.5 mm please check. (cannot be attached in the case of more than 13.5 mm. ）
If you can't be loaded depending on the vehicle and wheel. After replying OICE adapt individual models cannot. In vehicle mounted beforehand please check. Please note that you cannot accept returns after installing.
On the use Notes
-Spacer mounting your hand (recommended torque wrench). Evenly tighten with 10-12 kg / m of torque. Fastening with impact wrench do absolutely. -Steel wheel mounting surface plane is not. -Vehicle drum brake on some models Wheel mounting surface is not flat. Cannot install in that case, so always check is acceptable. By, and the thickness of the spacers and wheel offset degree etc. Tire and wheel changes than the vehicle fender, You may contact and vehicle underbodies Make sure that is acceptable. And depending on the thickness of the spacers to use when installing a spacer The long bolt is required. -Aluminum wheels are mounted at the same time for rear wheel sensor Trehub entrance shape (chamfer C plane angle). Spacer's wheel on the end by the wheel is fitted If not and if they come to the surface could not stick to all the There. (Above 4 C C surface for spacers in our store If you are mounting) -Constrained use public roads for riders per wheel spacer You may receive. The liability of accidents happened, wheel spacer install negative Please note that the No.