Shop Japan. We ship worldwide, bringing Japan directly to you.

Nagai electronic ULTRA drive monitor No.4020

Buy it and earn 153 points! About Points
$ 138.83 (¥ 15,390)
Actual price may vary according to exchange rates.
Payment will be charged in yen

Sold Out

Product Information

Nagai electronics maker site▲ Click here
Nagai electronic ultra drive monitor No.4020

♦ speedometer &REV (bar graph) mode
— Regular view
 -Digital speed display to enable measurement of up to 300 km/h or more,
  In the bar graph display engine rpm.
 -High speed memory function.
 -Torque limiter function. (Sports car)
— Speed warning display
 • Back light with buzzer sound warning and set the speed to reach the warning function.
  Back light: Green-flashing red.
  Buzzer: 10 km/h over holiday to three sound changes

♦ oil replacement mode
— Warning: (extra distance display)
 -By 3,000 km, 5000 km, to set any one of 10,000 km
  Upon reaching oil replacement warning. (Oil flashing)
 -Oil Exchange mode shows remaining oil Exchange distance. (per minute)
 -After reaching the ignition "ON" when the seconds between replacement alert automatically.
 -0 km when setting the ODO meter 1 km per show)

♦ trip A mode
— Normal driving distance m
 -Driving distance display: 2-way display in 0.1 km or 1 m units.
  (Up to 449.999 km measurement visible)
 -Display takes time: 00: 00 to 99 hours and 59 minutes.
  (Less than 60 minutes showing up to hundredths of a seconds allowed)
 -Average speed display
— Subtraction driving distance m
 -Count during the MIS help drive rally and in subtraction, hold function.
  When you subtract: low tone buzzer sounds, red lit back lighting.
  Hold time: bass-treble buzzer sound, green-red flashing back lighting

♦ trip B mode
— Real-time display only (per sector)
 -Driving distance display: 2-way display in 0.1 km or 1 m units.
  (Up to 449.999 km measurement visible)
 -Display takes time: 00: 00 to 99 hours and 59 minutes.
  (Less than 60 minutes showing up to hundredths of a seconds allowed)
 -Average speed display.
 Subtract the hold feature: A trip with operation.
 -Time display: to set the average rate in the on-time delivery
  Time difference measurement indication in real time

♦ speed meter
— Speed display function
  Digital speed display to enable measurement of up to 300 km/h or more
  Equipped with a function to record the fastest.
— Warning function
  To reach the set speed and turns back lighting,
  Warning function at the buzzer.

♦ tripping mode
Adopt the dual rally computer take comparable trip mode (integrated function).
For the said development adopted all the features that
Condensed to this trip, and that is no exaggeration.
Suitable for twin trip = competition section, total distance, time measurement
Twin trip features. Equipped with dual integrated function as a trip a/b
Of course, each rally leg distance, travel time measurement
From the start to be used in the SS (special stage) in the SS sector
Trip mode for measuring distances and duration, displaying the speed competition.
* 1 trip a/b with 1 m units, at 0.1 km in 2-way measurement can be displayed.
Displays the time, average speed, the distance from the start.
* 1 trip mode the maximum distance is 450 km, or elapsed time
More than 100 hours and automatically distance, time and resets to 0.
About time * 2 trips while on display in less than an hour,
In other words, for the 59 minutes 59 seconds up to 1 / 100 seconds
About beyond the one hour time display 00 x x-△ △ seconds and display seconds

-Subtraction / hold mode
  Odometer trip a/b is essential to drive rally competition
  Use the subtraction / hold function. If you miss,
  You can be subtraction from trip odometer back to turning point,
  You also stop convenience store and the rest along the way and measure to temporarily suspend
  Hold mode (pause mode) has been adopted.
— On time display function
  Trip B randomly in any-to set degree of mph (prescribed rate) by the
  Display the actual average speed and average speed difference measurement in real time
  New settings-display feature.
  Traveling at the speed specified will be used in rally competitions, set the speed and distance
  Delayed operation, and always show 早着 that rode on the average speed
  Whether ability to tell. However, speed is a measurement interval in only 1 speed settings,
  Cannot be changed in the same interval)

♦ calibration distance (tire diameter)
Powered by the rally as an indispensable distance error correction.
Tire / wheel changes and originally appearing speed and distance errors
In increments of 0.1% ± can be corrected up to 50%.
This stable distance measurement becomes possible, drive rally, in our
Contribute to the accuracy improvement.
(Can any correction of the error interval set distance in the competition and the distance actually traveled)

♦ limiter function
remove the speed limiter to operate at 180 km/h. (Also suitable for mini 140 km/h)
Please use only to carmakers in the circuit is the * sports car features.

♦ revmeter mode
(Shows the rotation number cannot be used in diesel-powered vehicles)
Engine rpm indicator displays at all times. (Top display is 7000 rpm)

♦ oil warning function
-3000 can be set to any oil replacement in one of 5000.10000 km
Upon reaching the warning.
Set the distance reached after shows excess distance IG at power-on

♦ 4020 specifications
 -Dimensions: 94 (W) x 34 (H) x 26 mm (D) / weight: 57 g /
 Display, LCD (with lighting)
 -Rated voltage DC10V ~ DC15V (12 V negative ground cars only)
 -Consumption current: max 60 mA
 -Operating temperature:-20 to 70 ° C
 -Apply car speed pulse number: (basically domestic vehicles will apply) for 2, 4, 8
 -Number of applications: 1 ~ 8-cylinder (4-stroke)
 -REV inputs:IG coil Terminal output
 Applied to the engine computer turn signal output
 -Speed display: 0 ~ maximum speed 300 km/h or more
 -Maximum number of revolutions (bar graph) display: 7, 000 rpm
 -Total distance: trip a/b with best 449.999 km
 (1 m and 0.1 km in the unit can be displayed), subtraction, hold function
 -Total duration: up to 99 hours 59 minutes (far less than 60 minutes to hundredths of a second can be displayed)
 -Tire diameter correction: up + up to 50% in 0.1% increments possible correction
 -Oil warning features: replacement for 3000, 5000,
 Choose from 10,000 km alerts on Exchange can be reached at
 ● Torque limiter function
 -Long product warranty for one year.

♦ Please note
 -Vehicle speed signal is required to install this product.
 Genuine equipment of the car speed signal to the optional speed sensor No.6680 with
 Is required.
 -REV (engine speed) meter mode cannot be used in diesel-powered vehicles.
 -Please note this product not part on imported vehicles.
 -Some vehicle Torque limiter is not models.
 Also, for Torque limiter release as long as driving in a closed circuit, etc.
 Please use it. Driving on public roads of unlocked Torque limiter will not find.

Recently Viewed Products

See All >

Not available for Overseas shipping

This product cannot be shipped to Us United States from the store.

Please contact the store for further information.


Delivery Rates : EMS (International Express Mail Service)

Ship to
Shipping Option
Note: Exchange rates are for reference only.
Back to Top