SG original planning round 6! SG ベアリングリムーバー
ベアリングリムーバー is a fully bespoke products through the production at domestic plants from design with attention to choice of materials! Remover unscrew also bearing the axis side of the most rider-friendly Yo-Yo in 2013, when circulation is also ヨーヨープレイヤー "standard equipment".
Is a tool to remove the yoyo (yoyo jam bearing diameter, large-diameter bearings) C size bearings.
Not to disturb even key ring size. C size bearings with models such as the ヨーヨーファクトリー metal Yo-Yo, as well as yoyo jam products are available.
(As a practical tool in the road, including authentic maintenance had long-nose pliers, such as useful)
2013 M5 axis add model from the production version. Measured acceleration to 4.9 mm in response, in general C size bearings models became available to most.
• M4 for conventional bearings get stuck in those somewhat by tight ・ M4 まで 対応 の 従来 品 は ベアリング の はまり 方 が やや で きつ め 本体 の 剛性 も 高く なって います 。 high body stiffness. Axis of non-compliance is common 1 A Yo-Yo if almost does not matter.
-M5-enabled products are stuck in is a little loose in affects the body somewhat thinner than normal and body stiffness somewhat sacrifice is. Is is available in a wide range of yo-yo.
Please choose to suit your requirements.
★ design and production by: hishida than append reproduction: 6/2013
From 2005, production began to people to you, I am grateful.
Almost no Yo-Yo which at that time, yoyo jam to safely remove bearings, reducing maintenance time of the yo-yo of mass produced on purpose remover.
Just now in year 8 aluminum Yo-Yo was mainstream. Ageing of the body design had decreased more than one time bearing rock hard than you need models take Remover off my in some cases. Only as a tool for a quick stay, at home in conjunction with tools such as pliers, please.
2010 Production at this time production is basically same as mating and bearing made deliberately and fairly tight. Is stuck in loose is better if you should try shaving tip a little with sandpaper, etc. Please contact if the bearings are 引き抜けない from the Remover individually will be enabled.
|Body and ring: stainless steel|
|ベアリングリムーバー: length 5 cm|
For bearing C size (large size of yoyo jam)
Survey for M4 is for yo adopted up to 4 mm shaft
If you would like to receive products from this shop in us you must use a Forwarding Service.
Do you have an existing Forwarding Service Address?