● Yamato's House will be shipped by courier. When you use the following restrictions may apply.
1. If out of stock will be cancelled.
2. Cod is not available please note that.
3. Delivery date and time of arrival will be.
4. No compensation for delay in delivery.
5. Shipping product is not bundled with other products.
6. Delivery usually takes 2-3 days.
7. Cannot give orders after cancellations and changes.
8. Receipt of invoice and is published in PDF format.
（ If you would like your order after the email contact us.
9. If no check read all notes check box
Will be cancelled.
For SONY cam
Can mount and tripod and grip while connecting external devices
Is the frame can connect different pins from the lower portion of the frame.
For example, can also be mounted on a tripod, connect USB cable to the hand taken while power and audio input jack to microphone, to record clear audio.
Can be mounted in many different directions
Cameras can be installed in the orientation of both up and down and back and forth.
Also comes with attachments, L-type attachments skeleton frame can be attached to either.
In a variety of angles, such as shooting, thereby suspended from the top of shot.
Even without the accompanying case camera can be attached as
Without the supplied waterproof case, and optional handlebar mount （ VCT-HM1 ） and ウオータープルーフヘッドマン (sold separately) can be attached and Kit （ VCT-GM1 ）.
Dimension （ width × height × depth ）: 77 mm x 58 mm x 31 mm
Weight: approx. 19 g
Dimension （ width × height × depth ）: 61 mm x 28 mm x 10 mm
Mass: approx. 6 g
Dimension （ width × height × depth ）: 61 mm x 42 mm x 35 mm
Weight: approximately 12 g
* Except for the maximum projection
If you would like to receive products from this shop in us you must use a Forwarding Service.
Do you have an existing Forwarding Service Address?