eTrex 10, 20, 30 for
* Supports all types of series.
button operation, such as a stick in the left holder holder made from private eTrex10 and 20、30 because the left and right soft keys is possible!
eTrex10, 20, please note no compatibility and eTrex series of others because we are created for the 30.
Holder mounted on the arm are released from many companies, but not in actual use never better ease of use.
Mountain craft holder making the repeat tests in the field → prototype, finished products reflect the user's voice intact.
GPS holder is specialized to be fitted on the arm holder. For mounting in Zack's sash
Not equipped with accessory straps, so please note, please.
Holder produced in the mountain craft, sells has the following features.
(1) View visibility
To get cloudy, things that can't see the LCD because Snow Crystal piece vinyl and scratched vinyl by the temperature difference between partly cloudy, Frost and easier to vinyl is cracking under low temperature, such as in vinyl.
This trouble no LCD, plastic to prevent the exposed.
Provide travellers with integral LCD part off and clogged snow dough liquid around a drop shadow on LCD LCD side panel between the Outer fabric and the lining plates into the deformation will be minimal.
Holder side piece is not to interfere with the operation of each button to configure with minimal panels.
In addition, cutouts cutouts in the liquid part is working with sticks, various buttons that we can tailored to each model is
For the sandwich plate thickness. Operation and if worn over hand, somewhat, not only leprosy Please note that there are some things.
* For the operation of for LCD when I wear the GPS holder , cut bigger.
(3) GPS fall prevention
To prevent it from falling to the four measures.
During the first one is mounted on the arm holder opening on upper (side shoulder) is the second holder lid snow arrived secular rather bad sticking Velcro, has metal button. Third use non-slip material on the inside of the holder, and the holder side piece makes is used for エラステックゴム entire holder small, enhance the fit. Is the fourth holder with a GPS unit can bind small side-release buckle.
(Side-release buckle to the GPS unit strap mounting area a series will only ）
(4) Fitted, fit
Mounting and wearing gloves, such as effortless as 50 Emiri wide rubber band one has.
Travellers with rubber twist when SQ (purapatsu folded rubber) not move vertically in the nylon tape backed by SQ part.
Also to provide even a little friction nylon material with rubber in the bottom side of the holder are sewn anti-slip material.