The full size MS-20 analog synthesizer which is assembled by KORG MS-20 Kit analog synthesizer assembling kit KORG oneself
* Limited Edition for the timing of your order may be out of stock.
Please note that when sold out.
KORG Ms-20 Kit analog synthesizer Kit
Assembled in their own full-sized Ms-20.
Ms-20 Kit assembling parts according to the instructions in the kit can get genuine Ms-20 is.
Only with centering screws and fitting work, so is no difficult soldering and electronics knowledge.
Ring in the MS-20 was completed at their own analog sound is surely worth than any other synth sounds would be.
Also because unlike the MS-20 mini Ms-20 Kit full size keyboard standard keyboard, plug plug the standard uses.
With early and late-2 types of filters.
Original MS-20, had adopted the VCF circuit vary depending on date of production at that time.
The radical early type filters have a peculiar distortion, self oscillation and noise is low and sweet mellow late type filters exist.
At the time of Ms-20 Kit powered by what both filters.
You can use according to user preference, you can switch the jumper on the Board.
Original MS-20 engineers responsible for supervision.
Completely reproduce the analog circuit at the time.
Ms-20 Kit, as well as the MS-20 mini engineer himself at the time and leader development and worked to fully reproduce the original circuit.
Where replacement parts are needed in judging by the engineer's ear that reproduce the sound at that time. Ms-20 Kit with a few radical sound with bright is original MS-20 sound itself not released at that time parts deterioration condition.
2 VCO/2 VCF/2 VCA/2 EG/1 LFO configuration.
Ms-20 Kit has reproduced the characteristic synthesis of two oscillators with ring modulator, hold, delay envelope generators, such as Ms-20.
Patching system boasts a high degree of freedom.
Patching system Panel on the right side to prepare for the complex sound design by changing the connection of each unit and wire in the cable jack.
Potential depends on the mindset of the user depending on the combination of modulation of input/output and trigger, sample & hold, noise generator various sound creation is possible.
You can start even beginners can passing along the flow chart of the MS-20 is written to the Panel.
To process external signals to an external signal processor (ESP).
Emblematic of the experimental spirit of the MS-20 ESP can control the synthesizer in the external input sound's pitch or volume.
For example to enter to enter the electric guitars and guitar synthesizer, Mike and can be used as vocal synthesizer.
Equipped with MIDI IN connector and USB connector.
Note message can receive MIDI IN and note messages with USB-MIDI and can send and receive. By connecting a computer, and, using the sequencer to play becomes possible.
AC adapter specifications.
Has power uses AC adapter voltage specifications have been used within is a similar design as the original.
Reproduce the original package book or supplied documentation.
At that time also fit the product package and reproduce as much as possible at the time, describing how to make the original MS-20 instruction manual and sound setting chart included intact. In 1978, revived the inspiring release at that time.
Front panel, rear panel, bottom Edition, L-shaped bracket （ × 2 ）, side panel, side panels R, side shield sheets L, side shield sheet R, panel support seat knob (large) （ × 7 ）, knob (small) （ × 29 ）, rubber bushing （ × 10 ）, rubber feet （ × 4 ）, code hooks and nuts 12 mm gloss and （ × 36 ）, washer （ × 36 ）, screw （ × 36 ）, nut 11 mm gloss without （ × 30 ）, glazed nut 11 mm and （ × 6 ）, keyboard unit and wheel unit The rear Jack Board Unit, Panel L Board, Board Panel R Board + VR (small), VR (big) Board, power Board, Megan Ranch (included)
Keyboard 37 keys (octave 3)
The main controller
Control wheel (Center detent), momentary switch
SIGNAL IN connector (mono phone jack), SIGNAL OUT terminals （ Mono phone jack, 2 VP-p output, 3.5 k Ω ）, PHONES Jack (stereo phone jack, 33 Ω 48 mW), DC12V connector, MIDI IN connector, USB (type B)
573 Outline dimensions (W) x 316 (D) x 248 mm (H)
Weight 6.0 kg
Accessory AC adapter （ 12V/1.5A ）, patch code 10
More items you might like from this store
Recently Viewed Products
JP Post EMS
Your order will be shipped to you via Japan Post EMS. Japan Post is a speedy delivery service that delivers to more than 120 countries. With an effective tracking system and insurance program, EMS is able to offer a secure delivery worldwide. You can track your package with the tracking code provided and it will be delivered within a week. See estimated shipping fee
We accept credit cards.
The following credit and debit cards can be used:
Visa, MasterCard, American Express, JCB, and Diners
*Orderer name should be matched with the holder name of the credit card.
We accept payment by PayPal.
You will receive a notification email of the total amount of payment by PayPal.
We will ship your items as soon as possible, after your payment by PayPal.
Your order will be canceled automatically, if we cannot confirm your transfer within 7 days after the notification of the total amount.
*Shipping Address on Rakuten-Ichiba should be matched with the Shipping Address on Paypal.
Same as Orderer name and Payer name.
The Payment Amount is calculated as below.
Payment Amount = Product price total + shipping fee
Upon confirming your order, we will send you a link to make a payment via UnionPay’s secure payment page.
You must finish the payment process before the deadline to complete your order.
Please check the payment process from the link here.
1) After placing your order, an automatic reply will be sent to you. Please note that the money amount mentioned in this email only applies to delivery in Japan.
2) You will receive an e-mail with the Total amount billed (Item amount + Shipping fee) from our shop, after placing your order. Please check the total amount then.
3) In the case of credit card payment, items will ship if you send a reply. In the case of PayPal payment, your ordered items will be shipped out after we confirmed your payment.
Customs duty and other taxes may be levied when the shipment reaches your country. If applicable, please pay those costs directly to the delivery agents or the customs office. Policies on those taxes vary in each country. Please contact the customs office in your country for more details.
Please note there may be delayed depending on customs clearance and other various conditions of transportation. Please kindly understand.
Cancellation after shipping products cannot be performed for overseas shipment.
We cannot accept any return or refund caused by customers' preference.
You can not do a return or exchange about this shopping.
If the item was damaged, please take the damaged item along with all packaging into your local post office to assess and a Damage Report to be completed.