TASCAM US-366 audio interface
Support convincing recording HDDA mic sound quality and more features.
DSP mixer equipped with USB2.0 192kHz compatible audio interface.
"US-366" is the audio interface DSP mixer provides various uses robust aluminium body according to the lineage 2 high quality HDDA Preamps, recording environments. Support DSP mixer features to support more advanced successor to the popular US series, recording a further than in the "US-366' 96 kHz to 192 kHz format.
Mic Preamps have influential sound in recording equipment. "US-366' with HDDA (High Definition Discrete Architecture) mic preamps. Supports treble pawn power preamp on the discrete part was selected after the evaluation. XLR/TRS input terminal is equipped with 2 lines, use of condenser microphones are available. In addition, INPUT 1 direct connection of guitar so are easy setup soon recorded the guitar phrases. HDDA Mic Preamps in a frequency characteristic 10 Hz 68kHz a wide range, and even in the entire circuit until the output has achieved low EIN (-120 dBu), lower overall distortion factor (less than 0.0045%), high s/n ratio (98 dB), so input of course even for monitoring high-definition recording environment provides.
In addition, the body with a DSP mixer, DSP effects. Along with providing various usage corresponds to the advanced recording. DSP mixer offers two operating modes, you can take advantage of to the Internet live music production as well as. DSP effects with whichever can take advantage of to send audio to add effects to your sound ダイナミクスエフェクト and PC or monitoring audio. In recording the vocals, singing with easy-to-sing took the reverb, as well as entering a speech compressor with monitor audio monitor sound. DSP mixer the MIXER PANEL buttons were equipped with a body can show / hide in one action.
"US-366' with specifications to support advanced environmental building. In addition supports 192 kHz recording features with rich set of input and output terminals, digital inputs and outputs are equipped with two types of COAXIAL/OPTICAL. Analog input and output enables you choose analog input or analog output 2 RCA pin Jack with switchable output, and use environment. Provides hands-free control of your DAW software, and can be also sold separately RC-3F foot switch connection. Already, many recording equipment holders, ideal for wishing to build a high level recording environment.
"US-366' desktop design easy to use the rich features of these bodies contained effectively by HDDA mic enable high-quality sound recording as well as, support can respond to the next level in the future, you can convince the sound production.
High-quality recording hardware
■ with high sound quality "HDDA (High Definition Discrete Architecture) Mic Preamp
Determine recording quality Mic Preamps with HDDA Preamps conducted a thorough evaluation at the end of the part selection. Is a discrete configuration be composed of parts stuck to the quality carefully selected transistors, such as differential amplifier circuit. Frequency characteristic 10 Hz 68kHz wide, expressive playing clear sound amplified and sent to DAW can.
■ for 24bit/96kHz (US-366, 192 kHz) format recording
Can be used due to the high-speed large-capacity HDD, PC, large amounts of data and high resolution format also has many. These supports 192 format recordings in the "US-366", and corresponds to the current production environment.
* Support recording comes with CUBASE LE is 192 kHz.
■ two equipped with phantom power for terminals and support TRS XLR input
Equipped with two phantom power supply is possible XLR and TRS balanced input terminals input terminals so condenser mics are available as well as dynamic microphone. Low noise balanced connections in line connection equipment such as keyboards. In addition, since corresponds to the high impedance input INPUT 1 guitar direct connection is possible.
Suitable for recording high-quality DSP mixer
■ DSP mixer provides two suitable mode (onboard digital mixer)
Built-in DSP mixer can change modes leverage in a variety of applications.
Multitrack mode is a mode suitable for music production. For inputs (feed volume to a PC) and the monitor (listen to playing in volume) volume can be adjusted separately in volume while at a level suitable for recording the best monitoring is possible. In addition, monitoring with Mono mixer operation is possible.
Stereo mix mode is a convenient mode to use "US-322" and "US-366" in the live Internet broadcast and video editing. It is possible that voice input as well as within "US-322" and "US-366" mix audio from a PC to send your PC again. We can use, such as make announcements while background music playing in the PC back to the PC.
■ to support a high quality recording, voice input DSP effects (Kitara)
Body with a variety of effects. When recording the recording is possible, of course, monitor audio effects such as reverb also.
88.2/96/176.4/192kHz behavior when using effects.
ダイナミクスエフェクト 1 strains available at the same time includes compressor, noise suppressor, de-Esser, Exciter, 3-band equalizer. When you use the dynamic microphone high we can use, such as vocal range boost, improve the clarity over the compressor light level to prepare.
Whichever provides the reverb. Dry during the recording of sing comfortably by applying light reverb is not motivated in the vocals, get a better take on that will be possible.
■ the MIXER PANEL button DSP mixer can be invoked in one action
DSP mixer control from laptop screen, operation screen is calling on action from the dedicated button on the "US-366" console is possible. So you can press it again and close the mixer screen can quickly build mixer screen only when you want to manipulate.
Enhanced to support easy-to-use environment specifications
■ You can play without the stress low-latency monitoring
Monitoring and enable the low-latency monitoring via the DSP mixer, low lag and playing is possible. Monitor balance can easily adjust the knobs of the top panel.
■ monitor level control for extra large LINE OUT volume
Monitoring by monitor speakers, during recording, mixing in the check in, such as optimal monitoring volume differ. Large volume knob was employed in the "US-322" and "US-366" in small knob allows precise volume setting impossible, it is possible to set the optimal volume instantly.
■ aluminum materials by directing precision, luxury desktop design
In production work, leads to a master sound with high quality to maintain high motivation. Will be adopted in the "US-366" in high quality aluminum top panel, aluminum of distinctive luxury contribute to production work motivators. In addition, each operation child also has adopted aluminum materials, to produce a sense of precision in the line-out volume spin finish.... For desktop design, through operation child placement you can afford for each operation easier.
■ suitable for input / output selector switch can respond in a variety of environments, up to 6 inputs / max 6 output
In LINE 3-4 terminals that switch expression corresponds to connect various devices.
If the switch is set to the INPUT RCA unbalanced analog input and becomes the front 2 ch, digital plus 2-channel RCA analog 2 ch input next to total 6-channel input is possible.
If you switch the OUTPUT RCA unbalanced analog output, in addition to TRS balanced output 2 ch, digital 2-channel RCA unbalanced analog 2-channel output next to total 6-channel output is possible. Main outputs the same signals can be assigned on a DAW/DSP mixer, if you connect to the separate headphone amplifier, such as in the volumes of the individual monitoring becomes possible.
* In US-366 192 kHz operation at the switch OUTPUT when digital output the same signal is output from the RCA terminals.
■ COAXIAL/OPTICAL digital output corresponding to connect various digital devices
Digital inputs and outputs are equipped with RCA COAXIAL or OPTICAL TOS link.
* Use the outputs parallel output COAXIAL/OPTICAL, input select either.