Acrylic mold cafe type set [with the extruded board] for handmade soap

I introduce how to make handmade soap to be able to make in a kitchen⇒ I introduce the voice that a visitor gave to me♪ ↓　↓↓　↓

※November 1, 2009 renewal
The necessities of the handmade soap lover.
It became easy to use an acrylic mold more and was rebeared! ！

○o. Where changed? ?
Partial (7.5cm) acrylic thickness to work hard on at the time of pushing outI switch from 5mm to 10mm and doubleI did it.
I can reduce a burden to take at the time of profiling by having thickened it.

It is a mold of cafe ド サボンオリジナルサイズ more smallish than milk pack size.
I am finished to soap of the size that I did around that is easy to adjust to small one of the hand if I cut it into thick pieces.

● When I make it with 500 g of oil gross weight, one approximately 65*250*45 millimeter of soap is done.
　　* It is size just after the profiling when I calculated with oil gross weight 500g+ fluid volume (35%) + caustic soda.

● Ten soap about 70 g of one is completed when I cut it at thickness of 25 millimeters.
　　* The weight changes by a recipe.
　　　In addition, because water falls out as drying advances, the soap lightens and shrinks.

[set contents]
A board for main body of acrylic mold, saucer, pushing out: For each one

[mold size]
本体内寸: 65* 250* width length 60 millimeters in height
受皿内寸: 78* 273* width length 20 millimeters in height
A board for pushing out: 5 millimeters of 60* 245* width length thickness

☆☆☆A one-year certificate sticks to an acrylic mold of our store.

↓When there is の item, it is more convenient♪
	Extruded supporting parts
	Soap cutter	Wooden box for the aging

• 5 /5

  Posted by ユッコ198648 on 5/23/13

  I made soap with a milk pack, but after all am convenient so far when there is a mold. When a model falls out neatly, I am glad. It is attractive that there is a guarantee.

• 5 /5

  Posted by すめらぎ5587 on 5/19/13

  I purchased a milk type last time, but it is possible for soap of just right size, and the cafe type often makes it here recently because it was the size that is slightly big for soap because there is much number and can take it. It is recommended size!

• 4 /5

  Posted by じょんち2005 on 5/19/13

  I used it for the first time, but excluded it from a model without falling apart and was finished neatly. I come to want the round shape, too and I will buy it or am at a loss.