Forwarding Campaign

CT 250A division type AKW4803C for exclusive use of the current sensor (CT) Eco DIN type for exclusive use of Panasonic

Rakuten Super Points
Buy it and earn 87 Points!! Details
$ 86.56 (¥ 8,790)
Actual price may vary according to exchange rates.
Payment will be charged in yen
The quantity you chose exceeds the quantity available.
Please select a valid quantity.
Please select options before adding to cart.
This page is a simplified version of an original Japanese page.
See the original page

Delivery orders after 5 days. (Excluding weekends and public holidays)

-4 Types of dedicated CT sensor enabled, cover a wide range of measuring range
4 Type CT current sensor (sold separately), and cover a wide range. For the secondary current 5 ACT type.
However, combines, and dedicated CT secondary current 5A if you use two-stage configuration.

*-Only current sensor (CT) circuit voltage 440 V AC system following the low pressure only. Cannot be used in the high pressure circuit.
* If different inputted except the AKW8115 measuring the high voltage circuit, the secondary side current 5A high voltage circuits for commercial because CT and 5 A measure in combination with private CT ( AKW4801C ) AKW4801C Hahahahahaha would need. In such individual user's manual for more information, please check.
* Available if measured by the AKW8115 private CT accidentally dedicated CT purchased not so careful please.
To AKW8115 current sensor (CT) (shares) made of yew r Dee (CT CTL-CL series split type) is recommended so check the specifications in advance.
* Various special current sensor (CT) not included in the inputted.
To * various special current sensor each 1 m cable extension cable included. (Except BT37066)

Split type

Item AKW4801C AKW4802C AKW4803C AKW4804C
Rated primary current 5 A/50 A. 100A 250A 400A
Secondary side current 1.67mA/16.7mA 33.3 mA 125 mA 200 mA
Number of turns 3000 3000 2000 2000
Ratio error ± 2.0%F.S.
Through-hole Diameter 10 mm Diameter 16 mm 24 Mm Diameter 36 mm
Withstanding voltage (initial) AC1000V/1 min
(Transmembrane holes and between the output lead wire)
AC2000V/1 min
(Transmembrane holes and between the output lead wire)
Insulation resistance (initial) Ω over at DC500V Megger ( ) (transmembrane holes and between the output leads), 100 M.
Vibration malfunction 10 ~ 55 Hz ( period 1 minute ) piece amplitude 0.15 mm (top and bottom, left and right, back and forth in each direction for 10 minutes)
Vibration durability 10 ~ 55 Hz ( period 1 minute ) piece amplitude 0.375 mm (top and bottom, left and right, back and forth in each direction 1 hour)
Malfunctioning shock 98 m / s 2 More (up and down, left and right, back and forth in each direction four times)
Shock 294 m / s 2 More (up and down, left and right, back and forth in each direction five times)
Output protection ± 7.5 V clamping elements ± 3.0 V clamping elements
Number of permissible removable About 100 times
Operating temperature range -10 ~ + 50 ° C ( however, freezing and condensation )
Storage temperature -20 ~ + 60 ° C ( however, freezing and condensation )
Ambient humidity 35 To 85% RH (at 20 ° C without condensation that)
Mass (weight)
(Relay cable included)
Approx. 60 g Approx. 90 g Approx. 200 g Approximately 295 g

Recently Viewed Products

Return Policy

×

Not available for Overseas shipping

This product cannot be shipped to Us United States from the store.

Please contact the store for further information.